444588
21
Zoom out
Zoom in
Previous page
1/104
Next page
Page 19FT-450 OPERATION MANUAL
TUNING STEPS
RECEIVING
The tuning step of the
[
MAIN DIAL
]
knob and the
[
DSP/SEL
]
knob is different depending on the oper-
ating mode.
1: When you press the
[
DSP/SEL
]
knob, the tuning step of the
[
DSP/SEL
]
knob changes to 100 kHz in all modes.
2: In the factory default, the
[
MAIN DIAL
]
knob does not tune
the AM and FM modes. However, you may activate the
[
MAIN
DIAL
]
knob on the AM and FM mode via Menu Item
A&FDIAL”.
O
PERATING
M
ODE
LSB/USB
CW
AM
FM
DATA
[
MAIN DIAL
]
1/10/20 Hz
1/10/20 Hz
100/200 Hz
2
100/200 Hz
2
10/20 Hz
[
DSP/SEL
]
1
1.0/2.5/5.0 kHz
1.0/2.5/5.0 kHz
2.5/5.0/9.0/10/12.5/25 kHz
5.0/6.25/10/12.5/15/20/25/50 kHz
1.0/2.5/5.0 kHz
K
NOB
Pressing the
[
FAST
]
button will increase or de-
crease the tuning rate of the
[
MAIN DIAL
]
knob
by a factor of ten and also increase or decrease
the tuning rate of the
[
DSP/SEL
]
knob by a factor
of two.
CHANGE THE TUNING STEP OF THE
[
MAIN DIAL
]
KNOB
1. Set the operating mode by pressing the
[
MODE
]
/
[
MODE
]
button.
2. Press and hold the
[
F
]
button for one second to
enter the Menu mode. The “ ” icon will ap-
pear on the display.
3. Rotate the
[
DSP/SEL
]
knob to select the menu
item “DIALSTP”.
4. Press the
[
DSP/SEL
]
knob to enable adjustment
of this menu item. The “ ” icon will be blink-
ing.
5. Rotate the
[
DSP/SEL
]
knob to select the desired
tuning step described above.
(You may Press the
[
HOME/RCL
]
button to reset
the tuning step to the factory default.)
6. Press the
[
DSP/SEL
]
knob. The “ ” icon is
displayed continuously.
7. Press and hold the
[
F
]
button for one second to save
the new setting and return to normal operation.
CHANGE THE TUNING STEP OF THE
[
DSP/SEL
]
KNOB
1. Set the operating mode by pressing the
[
MODE
]
/
[
MODE
]
button.
2. Press the
[
F
]
button momentarily.
3. Press the
[
STEP/SPLIT
]
button.
4. Rotate the
[
DSP/SEL
]
knob to select the desired
tuning step described above.
5. Press the
[
DSP/SEL
]
knob to save the new set-
ting and return to normal operation.
[
HOME/RCL
]
button
[
F
]
button
[
DSP/SEL
]
button
[
MODE
]
/
[
MODE
]
button
[
STEP/SPLIT
]
button
[
F
]
button
[
DSP/SEL
]
knob
[
MODE
]
/
[
MODE
]
button
[
DSP/SEL
]
knob
[
MAIN DIAL
]
knob
[
FAST
]
button
NOTICE
Regarding of the
[
DSP/SEL
]
knob
The
[
DSP/SEL
]
knob is used for operating
various functions depending on the situation.
If you can not change the frequency/memory
channel by tuning the
[
DSP/SEL
]
knob, the
[
DSP/SEL
]
knob is selected to operate of one
of the DSP functions.
In this case, press the
[
DSP
]
button several
times until the “>” icon disappears from the
DSP Graphic Display.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-450 in the language / languages: English as an attachment in your email.

The manual is 9,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info