478464

Yaesu FT-2800M Manual

29
Zoom out
Zoom in
Previous page
1/60
Next page
27FT-2800M OPERATING MANUAL
CTCSS/DCS OPERATION
ADVANCED OPERATION
CTCSS/DCS Bell Paging
During CTCSS Decode or DCS operation, you may set up the FT-2800M such that a ring-
ing “bell” sound alerts you to the fact that a call is coming in. Here is the procedure for
activating the CTCSS/DCS Bell:
1. Set the transceiver up for CTCSS Decode (“Tone Squelch”) or DCS operation, as de-
scribed previously.
2. Adjust the operating frequency to the desired channel.
3. Press and hold in the
[
MHz
(
SET
)]
key for one second, then rotate the DIAL knob to
select “04 BELL.”
4. Rotate the DIAL knob to set the desired number of rings of the Bell. The available
choices are 1, 3, 5, or 8 rings, REPEAT (continuous ringing), or OFF.
5. Press and hold in the
[
MHz
(
SET
)]
key for one second to save the new setting and exit to
normal operation.
When you are called by a station whose transceiver is sending a CTCSS tone or DCS code
which matches that set into your Decoder, the Bell will ring in accordance with this pro-
gramming.
Split Tone Operation
The FT-2800M can be operated in a “Split Tone” configuration, to enable operation on
repeaters using a mix of both CTCSS and DCS control. To do this:
1. Press and hold in the
[
MHz
(
SET
)]
key for one second, then rotate the DIAL knob to
select “28 SQ TYP.”
2. Press the
[
MHz
(
SET
)]
key, then rotate the DIAL knob to select the desired operating mode:
DC ENC: DCS Encode only (“DC” icon will appear while operating)
T+DCS: Encodes a CTCSS Tone and Decodes a DCS code
(the “T” and “DCS” icons will appear during operation)
TSQ+DC: Encodes a DCS code and Decodes a CTCSS Tone
(the “TSQ” and “DC” icons will appear during operation)
3. Press the
[
MHz
(
SET
)]
key momentarily, then rotate the DIAL knob one click counter-
clockwise to select Menu “27 SQ TNF.”
4. Press the
[
MHz
(
SET
)]
key momentarily to enable the adjustment of the CTCSS Tone.
5. Rotate the DIAL knob to select the desired CTCSS Tone.
6. Press the
[
MHz
(
SET
)]
key momentarily, then rotate the DIAL knob one click counter-
clockwise to select Menu “26 SQ DCS.”
7. Press the
[
MHz
(
SET
)]
key momentarily to enable the adjustment of the DCS Code.
8. Rotate the DIAL knob to select the desired DCS Code (a three-digit number).
9. When you have made your selections, press and hold in the
[
MHz
(
SET
)]
key for one
second to save the new setting and exit to normal operation.
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-2800M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-2800M in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info