36011

Yaesu FT-2800 Manual

43
Zoom out
Zoom in
Previous page
1/60
Next page
41FT-2800M OPERATING MANUAL
The FT-2800M can be used to access an Internet link on a repeater which is equipped for
operation using the Vertex Standard WIRES
TM
(Wide-Coverage Internet Repeater Enhance-
ment System) Internet linking system.
1. Press the
[ ]
key to activate the Internet Connection feature. The “int” icon will appear
in the memory channel field.
2. Rotate the DIAL, while pressing and holding in the
[ ]
key, to select the access number correspond-
ing to the WIRES
TM
repeater to which you wish to
establish an Internet link (ask your repeater owner/operator if you don’t know the access
numbers in the network).
3. With the Internet Connection feature activated (as in step 1 above), the FT-2800M will
generate a brief (0.2 second) DTMF tone according to your selection in step 2. This
DTMF tone is sent at the beginning of every transmission to establish or maintain the
link to the remote WIRES
TM
repeater, while operating in the “SRG” (“Sister Repeater
Group”) mode.
4. To disable the Internet Connection feature, press the
[ ]
key again.
For more information on WIRES
TM
, go online to http://www.yaesu.com/amateur/pdf/bro-
chures/WIRES.pdf for an informative brochure. Or send an e-mail to WIRES@vxstdusa.com.
You may access other Internet Link Systems that use a DTMF string for access.
1. Press and hold in the
[
MHz
(
SET
)]
key for one second, then rotate the DIAL knob to
select “10 DT MEM.”
2. Press the
[
MHz
(
SET
)]
key momentarily, then load the DTMF tones which you wish to
use to establish an Internet link (the linking system’s Home Page should have this infor-
mation) into the desired DTMF Memory channel.
1). Rotate the DIAL knob to select the DTMF Autodialer memory channel number
(“DTMF-1” through “DTMF-9”).
2). Press the
[
D/MR
(
MW
)]
key momentarily.
3). Rotate the DIAL knob to select the DTMF code, then press the
[
REV
(
DW
)]
key
momentarily to move the digit.
4). Repeat step 3) above as many times as needed to complete the access string.
5). Press the
[
MHz
(
SET
)]
key momentarily to save the new setting.
3. Rotate the DIAL knob to select “13 INTNET.”
4. Press the
[
MHz
(
SET
)]
key momentarily, then rotate the DIAL knob to set this item to
“LINK” (to enable the alternate Internet Link, and disable the WIRES
TM
access option).
5. Press and hold in the
[
MHz
(
SET
)]
key for one second to save the new setting and exit to
normal operation.
6. Press the
[ ]
key momentarily to activate the Internet Link System. The “int” icon will
then appear in the memory channel field while the Internet Link System access feature is
engaged.
INTERNET CONNECTION FEATURE
… 43 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-2800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-2800 in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info