36011
30
Zoom out
Zoom in
Previous page
1/60
Next page
28 FT-2800M OPERATING MANUAL
DTMF AUTODIALER OPERATION
Nine DTMF Autodialer memories are available on the FT-2800M. These DTMF Autodialer
memories can store up to 16 digits of a telephone number for repeater autopatch or other
use.
To load DTMF Autodialer memories, use the following procedure:
1. Press and hold in the
[
MHz
(
SET
)]
key for one second, then rotate the DIAL knob to
select “10 DT MEM.”
2. Press the
[
MHz
(
SET
)]
key, then rotate the DIAL knob to select the DTMF Autodialer
memory channel number into which you wish store a telephone number (“DTMF-1” to
DTMF-9”).
3. Press the
[
D/MR
(
MW
)]
key momentarily, then rotate the DIAL knob to select the first
digit of the telephone number you wish to store.
4. When you have selected the correct digit, press the
[
REV
(
DW
)]
key momentarily. Now,
rotate the DIAL knob to select the second of 16 available numbers in the current DTMF
Autodialer memory register.
5. Repeat this procedure for each digit in the telephone number. If you a mistake, press the
microphones
[
DWN
]
key to move back to the first digit, then re-enter the correct num-
ber.
6. When entry of all digits is complete, press the
[
MHz
(
SET
)]
key.
7. If you wish to store another DTMF string, repeat steps 2 through 6 above.
8. Press and hold in the
[
MHz
(
SET
)]
key for one second to save the new setting and exit to
normal operation.
To transmit the memorized telephone number, use the following procedure:
1. Press and hold in the
[
MHz
(
SET
)]
key for one second, then rotate the DIAL knob to
select “08 DTMF.”
2. Press the
[
MHz
(
SET
)]
key, then rotate the DIAL knob to set the DTMF Autodialer
memory function to the “ON” position (the “ ” icon will appear).
3. Press and hold in the
[
MHz
(
SET
)]
key for one second to save the new setting and exit
to normal operation.
4. In the Autodialer mode, which you just engaged, first press the PTT switch, then press
the microphones numeric key (
[
1
]
through
[
9
]
) corresponding to the DTMF memory
string you wish to send. Once the string begins, you may release the PTT switch, as the
transmitter will be held “on the air” until the DTMF string is completed.
To disable the Autodialer function mode, select “OFF” in step 2 above.
ADVANCED OPERATION
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-2800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-2800 in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info