36011

Yaesu FT-2800 Manual

23
Zoom out
Zoom in
Previous page
1/60
Next page
21FT-2800M OPERATING MANUAL
ADVANCED OPERATION
REPEATER OPERATION
The FT-2800M includes a host of convenience features which makes operation on amateur
repeaters both efficient and enjoyable.
Repeater Splits
This transceiver offers three methods of setting up split-frequency operation on repeaters:
[
1
]
Manual selection of preset repeater shifts;
[
2
]
Automatic Repeater Shift (ARS), providing automatic activation of repeater shifts
during designated repeater frequency subbands; and
[
3
]
Independently stored transmit and receive frequencies (typically not corresponding
to established repeater frequency shifts).
[
1
]
Standard Repeater Shift
To activate the standard shift manually, you may use the Set (Menu) mode:
1. Press and hold in the
[
MHz
(
SET
)]
key for one second, then rotate the DIAL knob to
select “21 RPTR.”
2. Press the
[
MHz
(
SET
)]
key, then rotate the DIAL knob to select the desired shift direc-
tion (–RPTR, +RPTR, or SIMP).
3. Press and hold in the
[
MHz
(
SET
)]
key for one second to save your new setting and exit
to normal operation.
You also may program one of the Microphone’s programmable keys
([
P1
]
~
[
P4
])
to allow quick access to the above procedure. See page 45 for details on the setup
of the programmable keys.
With repeater shift activated, you can temporarily reverse the transmit and receive frequen-
cies by pressing the
[
REV
(
DW
)]
key (or microphone’s
[
B
]
key). Use this feature to display
the transmit frequency without transmitting, and to check the strength of signals on a re-
peater uplink frequency (so as to determine whether or not a particular station is within
“Simplex” range, for example).
The repeater offset is fixed to 600 kHz from the factory. You can change the offset by the
following procedure, if needed for vacation travel or other purposes:
1. Press and hold in the
[
MHz
(
SET
)]
key for one second, then rotate the DIAL knob to
select “24 SHIFT.”
2. Press the
[
MHz
(
SET
)]
key, then rotate the DIAL knob to set the desired offset. Note that
the resolution of the “standard” repeater shift is to the nearest 50 kHz multiple.
3. Press and hold in the
[
MHz
(
SET
)]
key for one second to save your new setting and exit
to normal operation.
Do not use this procedure for programming of an “odd split” type repeater pair!
The process for programming odd splits is shown on page 23.
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-2800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-2800 in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info