674793
53
Zoom out
Zoom in
Previous page
1/64
Next page
FT-257 OperaTing Manual 51
The
FT-257
Set Mode, already described in parts of many previous chapters, is easy to
activate and set. It may be used for conguration of a wide variety of transceiver param-
eters, some of which have not been detailed previously. Use the following procedure to
activate the Set Mode:
1. Press the
[
SET/ATS
]
key to enter the Set mode.
2. Rotate the
DIAL
knob or press the
[
p
]
/
[
q
]
key to select
the Set Mode Item to be adjusted.
3. Press the
[
SET/ATS
]
key momentarily to enable adjust-
ment of the Set Mode Item.
4. Rotate the
DIAL
knob or press the
[
p
]
/
[
q
]
key to adjust or select the parameter to be
changed on the Set Mode Item selected in above step.
5. After completing your selection and adjustment, press the
PTT
switch momentarily
to save the new setting and exit to normal operation.
Some Set Mode Items (like Set Mode Item 42: TN FRQ) require that the [SET/ATS]
key be pressed after setting of the parameter, and before exiting to normal operation.
Set
(
Menu
)
Mode
Function
Enables/Disables the ANI function. Setting of the Automatic
Program the ANI Identier.
Power-Off feature.
Selects the Beep option during ARTS operation.
Enables/Disables the Automatic Repeater Shift function.
Enables/Disables the Busy Channel Lock-Out feature.
Enables/Disables the beeper.
Selects the number of CTCSS/DCS Bell ringer repetitions.
Shifting of the CPU clock frequency.
Programs and activates the CW Identier.
Enables/disables the CW identier during ARTS operation.
Indicates the DC Supply Voltage.
Setting of the DCS code.
Enables/Disables “Inverted” DCS code decoding.
Setting of the DTMF Autodialer Delay Time.
Setting of the DTMF Autodialer Sending Speed.
Programming of the DTMF Autodialer.
Enables/Disables the Band-edge beeper while selecting the
frequency via the DIAL knob.
Selects the alarm(s) utilized when the Emergency function is
engaged.
Setting of the synthesizer steps.
Selects the LCD/Keypad Lamp mode.
Selects the Control Locking lockout combination.
Selects the
[
VOL/SQL
]
key function.
AvAiLAbLe vALueS
(
deFAuLt: Bold ItalIc
)
ANI.OFF/ANI. ON
---
OFF / 0.5H - 12.0 H
INRANG / ALWAYS / OFF
ARS. ON / ARS.OFF
BCL. ON / BCL.OFF
KEY+SC / KEY / OFF
OFF / 1T / 3T /
5T / 8T / CONT
SFT.OFF / SFT. ON
---
TX OFF / TX ON
---
104 DCS codes (023)
T/RX N, RX R,
TX R, T/RX R
50MS / 100MS / 250MS /
450MS / 750MS / 1000MS
50MS / 100MS
---
BEP.OFF / BEP. ON
EMG.BEP / EMG.LMP / EMG.
B+L / EMG.CWT / EMG.C+B
/ EMG.C+L / EMG.ALL / OFF
5 / 10 / 12.5 / 15 / 20 / 25 / 50
/ 100 kHz, or AUTO
KEY / CONT / OFF
LK KEY / LKDIAL / LK K+D /
LK PTT / LK P+K /
LK P+D / LK ALL
MONI / T-CALL
Set Mode iteM
1
[
ANI
]
2
[
ANI.WRT
]
3
[
APO
]
4
[
AR BEP
]
5
[
ARS
]
6
[
BCLO
]
7
[
BEEP
]
8
[
BELL
]
9
[
CLK.SFT
]
10
[
CW WRT
]
11
[
CWID
]
12
[
DC VLT
]
13
[
DCS.COD
]
14
[
DCS.N/R
]
15
[
DT DLY
]
16
[
DT SPD
]
17
[
DT WRT
]
18
[
EDG.BEP
]
19
[
EMG S
]
20
[
F STEP
]
21
[
LAMP
]
22
[
LOCK
]
23
[
M/TCAL
]
honbun_130313.indd 51 2013/03/13 20:30:14
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-257 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-257 in the language / languages: English as an attachment in your email.

The manual is 5,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info