674792
59
Zoom out
Zoom in
Previous page
1/68
Next page
FT-252 OperaTing Manual 57
Set Mode Item 16
[
DT SPD
]
Function: Setting of the DTMF Autodialer Sending Speed.
Available Values: 50MS (high speed)/100MS (low speed)
Default: 50MS
Set Mode Item 17
[
DT WRT
]
Function: Programming of the DTMF Autodialer.
See page 43 for details.
Set Mode Item 18
[
EDG.BEP
]
Function: Enables/Disables the Band-edge beeper while selecting the frequency via the
DIAL
knob.
Available Values: BEP.OFF/ BEP. ON
Default: BEP.OFF
Set Mode Item 19
[
EMG S
]
Function: Selects the alarm(s) utilized when the Emergency function is engaged.
Available Values: EMG.BEP/EMG.LMP/EMG.B+L/EMG.CWT/EMG.C+B/EMG.
C+L/EMG.ALL/OFF
Default: EMG.B+L
EMG.BEP: Loud “Alarm” sounds.
EMG.LMP: The LCDs lamp ashes.
EMG.B+L: Loud “Alarm” sounds and the LCD/Keypad lamp ashes.
EMG.CWT: Transmits the Morse Code “SOS” (•
– – –
•) message on the air be-
ginning one minute after activation of the Emergency function.
EMG.C+B: Loud “Alarm” sounds and the Morse Code “SOS” (•
– – –
•) mes-
sage is transmitted on the air beginning one minute after activation of the
Emergency function.
EMG.C+L: The LCD lamp ashes, and the Morse Code “SOS” (•
– – –
•) mes-
sage is transmitted on the air beginning one minute after activation of the
Emergency function.
EMG.ALL: All of the above are activated.
OFF:
Disables the Emergency function.
When the radio is set to the EMG.CWT, EMG.C+B, EMG.C+L, or EMG.ALL mode,
the radio will be instructed to send “DE (your callsign)” after the sending of the SOS
message, if your callsign is entered via Set Mode Item 11:
CWID
.
Set Mode Item 20
[
F STEP
]
Function: Setting of the synthesizer steps.
Available Values: 5/10/12.5/15/20/25/50/100 kHz, or AUTO
Default: AUTO (Step automatically changes according to operating frequency.)
Set
(
Menu
)
Mode
honbun_130313.indd 57 2013/03/13 19:48:12
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-252 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-252 in the language / languages: English as an attachment in your email.

The manual is 5,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info