674792
48
Zoom out
Zoom in
Previous page
1/68
Next page
FT-252 OperaTing Manual46
CW Identier Setup
The ATS feature and Emergency channel operation includes a CW identifier, as dis-
cussed previously. Every ten minutes during ATS operation or every one minute during
Emergency channel operation, the radio can be instructed to send “DE (your callsign)
K” (ATS feature) and “SOS DE (your callsign)” (Emergency channel operation) if this
feature is enabled. The callsign eld may contain up to 6 characters.
Here’s how to program the CW Identier:
1. Press the
[
SET/ATS
]
key to enter the Set mode.
2. Rotate the
DIAL
knob or press the
[
p
]
/
[
q
]
key to select
Set Mode Item 10:
CW WRT
.
3. Press the
[
SET/ATS
]
key momentarily to display any
previously-stored callsign.
4. Press the
[
F/MW
]
key again to clear any previous callsign.
5. Rotate the
DIAL
knob to select the rst letter/number of
your callsign, then press the
[
F/MW
]
key momentarily to
save the rst letter/number and move on to the next char-
acter.
6. Repeat the previous step, as many times as necessary, to
complete your callsign. If you make a mistake, press the
[
q
]
key to move back to the previous letter/numbers slot,
then re-select the correct letter/number.
7. When you have nished entering your entire callsign and
it contains less than 6 characters, press and hold in the
[
F/
MW
]
key for one second to conrm the callsign. (if you
callsign has exactly 6 characters, you do not need to press and hold in
[
F/MW
]
in this
step).
8. Press the
PTT
switch to save the settings and exit to normal operation.
9. Press the
[
SET/ATS
]
key to enter the Set mode.
10. Rotate the
DIAL
knob or press the
[
p
]
/
[
q
]
key to select
Set Mode Item 11:
CWID
.
11. Press the
[
SET/ATS
]
key momentarily, then rotate the
DIAL
knob to set this Item to “
TX ON
” (to enable the CW
ID function).
12. Press the
PTT
switch to save the settings and exit to normal operation.
Miscellaneous Settings
honbun_130313.indd 46 2013/03/13 19:48:07
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-252 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-252 in the language / languages: English as an attachment in your email.

The manual is 5,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info