674792
28
Zoom out
Zoom in
Previous page
1/68
Next page
FT-252 OperaTing Manual26
Memory Mode
Deleting Memories
You may delete any of the memories (except for Memory Channel “1” and the Home
Channel). The procedure for deleting a channel is quite simple.
1. Press the
[
V/M
]
key, if needed, to enter the VFO mode.
2. Press and hold in the
[
F/MW
]
key for one second, then rotate the
DIAL
knob or
press the
[
p
]
/
[
q
]
key to select the memory channel to be deleted.
3. Press the
[
SET/ATS
]
key for one second. The display will revert to memory chan-
nel #1. The previously-selected memory will be deleted.
Important Notice! Once deleted, the channel data cannot be recovered!
Memory Bank Operation
The large number of memories available in the
FT-252
could be difficult to utilize
without some means of organizing them. Fortunately, the
FT-252
includes provision for
dividing the memories into as many as ten Memory Groups, so you can categorize the
memories in a manner convenient to you.
Assigning Memories to a Memory Bank
1. Recall the memory channel to be assigned to a Memory
Bank.
2. Press and hold in the
[
V/M
]
key for one second, then ro-
tate the
DIAL
knob or press the
[
p
]
/
[
q
]
key to select the
Memory Bank number you want as the Memory Bank for
this channel (“
BANK 1
” ~ “
BANK10
”).
3. Press and hold in the
[
F/MW
]
key for one second to copy
the memory channel data into the Memory Bank.
1) You may assign the same memory channel into multiple Memory Banks.
2)
The PMS memory channels (L1/U1 through L10/U10) may not be assigned to a Memory Bank.
Memory Bank Recall
1. Press the
[
V/M
]
key, if needed, to enter the Memory Recall mode.
2. Press and hold in the
[
V/M
]
key, then rotate the
DIAL
knob or press the
[
p
]
/
[
q
]
key to select the desired Mem-
ory Bank (“
BANK 1
” through “
BANK10
”).
3. Press the
[
V/M
]
key momentarily; now, as you rotate the
DIAL
knob or press the
[
p
]
/
[
q
]
key to select memories,
you will observe that you can only select memory chan-
nels in the current memory bank. The indication
will appear at the left side of the frequency display while
operating within a Memory Bank.
honbun_130313.indd 26 2013/03/13 19:47:57
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-252 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-252 in the language / languages: English as an attachment in your email.

The manual is 5,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info