674792
21
Zoom out
Zoom in
Previous page
1/68
Next page
FT-252 OperaTing Manual 19
9. Rotate the
DIAL
knob to select the
desired DCS Code (a three-digit num-
ber). Ask the repeater owner/operator if
you don’t know DCS Code; if you are
working simplex, just set up the DCS
Code to be the same as that used by
your friend(s).
10. When you have made your selection,
press the
[
SET/ATS
]
key, then press
the
PTT
switch to save the new set-
tings and exit to normal operation.
Remember that the DCS is an Encode/Decode system, so your receiver will remain
muted until a matching DCS code is received on an incoming transmission. Switch
the DCS off when you’re just tuning around the band!
CTCSS/DCS Bell Operation
During CTCSS Decode or DCS operation, you may set up the
FT-252
such that a ring-
ing “bell” sound alerts you to the fact that a call is coming in. Here is the procedure for
activating the CTCSS/DCS Bell:
1. Set the transceiver up for CTCSS Decode (“Tone Squelch”) or DCS operation, as
described previously.
2. Adjust the operating frequency to the desired channel.
3. Press the
[
SET/ATS
]
key to enter the Set mode.
4. Rotate the
DIAL
knob or press the
[
p
]
/
[
q
]
key to select
Set Mode Item 8:
BELL
.
5. Press the
[
SET/ATS
]
key momentarily to enable adjust-
ment of this Item.
6. Rotate the
DIAL
knob or press the
[
p
]
/
[
q
]
key to set the desired number of rings of
the Bell. The available choices are
1 T
,”
3 T
,”
5 T
,”
or “
8 T
” rings,
CONT
(continuous ringing), or
OFF
.
7. Press the
PTT
switch momentarily to save the new setting
and exit to normal operation.
When you are called by a station whose transceiver is sending
a CTCSS tone or DCS code which matches that set into your
Decoder, the Bell will ring in accordance with this program-
ming. When the CTCSS/DCS Bell is activated, the icon
will appear at the upper right corner on the LCD.
DCS CODE
023 025 026 031 032 036 043 047 051 053
054 065 071 072 073 074 114 115 116 122
125 131 132 134 143 145 152 155 156 162
165 172 174 205 212 223 225 226 243 244
245 246 251 252 255 261 263 265 266 271
274 306 311 315 325 331 332 343 346 351
356 364 365 371 411 412 413 423 431 432
445 446 452 454 455 462 464 465 466 503
506 516 523 526 532 546 565 606 612 624
627 631 632 654 662 664 703 712 723 731
732 734 743 754 – – – – – –
CTCSS/DCS Operation
DCS Operation
honbun_130313.indd 19 2013/03/13 19:47:50
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-252 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-252 in the language / languages: English as an attachment in your email.

The manual is 5,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info