674792
14
Zoom out
Zoom in
Previous page
1/68
Next page
FT-252 OperaTing Manual12
LCD Illumination
Your
FT-252
includes a reddish illumination lamp which aids in nighttime operation.
The reddish illumination yields clear viewing of the display in a dark environment, with
minimal degradation of your night vision.
Three options for activating the lamp are provided:
KEY
Mode: Illuminates the LCD lamp for ve seconds when you rotate the
DIAL
knob or press the keypad or any switch (except
PTT
switch). This is
the factory-programmed default setting.
CONT
Mode: Illuminates the LCD lamp continuously.
OFF
Mode: Disables the LCD lamp.
Here is the procedure for setting up the Lamp operating mode:
1. Press the
[
SET/ATS
]
key to enter the Set mode.
2. Rotate the
DIAL
knob or press the
[
p
]
/
[
q
]
key to select
Set Mode Item 21:
LAMP
.
3. Press the
[
SET/ATS
]
key momentarily to enable adjust-
ment of this Item.
4. Rotate the
DIAL
knob or press the
[
p
]
/
[
q
]
key to select one of the three modes de-
scribed above.
5. When you have made your choice, press the
PTT
switch to save the new setting and
return to normal operation.
Disabling the Keypad Beeper
A keypad beeper provides useful audible feedback whenever a key button is pressed.
If you want to turn the beep off:
1. Press the
[
SET/ATS
]
key to enter the Set mode.
2. Rotate the
DIAL
knob or press the
[
p
]
/
[
q
]
key to select
Set Mode Item 7:
BEEP
.
3. Press the
[
SET/ATS
]
key momentarily to enable adjust-
ment of this Item.
4. Rotate the
DIAL
knob or press the
[
p
]
/
[
q
]
key to change the setting to “
OFF
.”
5. Press the
PTT
switch to save the new setting and return to normal operation.
6. To turn the beep back on again, select
KEY
” or
KEY+SC
(factory default)” in step
4 above.
KEY
: The beeper sounds when you press the keypad.
KEY+SC
: The beeper sounds when you press the keypad, or when the scanner
stops.
Advanced Operation
honbun_130313.indd 12 2013/03/13 19:47:43
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-252 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-252 in the language / languages: English as an attachment in your email.

The manual is 5,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info