478472

Yaesu FT-250R Manual

18
Zoom out
Zoom in
Previous page
1/44
Next page
FT-250R OPERATING MANUAL14
TONE CALLING
(
1750 Hz
)
If the repeaters in your country require a 1750-Hz burst tone for access (typically in Eu-
rope), you can set the MONI key to serve as a “TONE CALL” switch instead. To change the
configuration of this switch, we again use the Menu to help us.
c
Press the
[
F/L
]
key, then press the
[
0
(
SET
)
]
key to enter the Set mode.
d
Rotate the DIAL to select Menu Item #19 (“
MONMON
MONMON
MON/
TCLTCL
TCLTCL
TCL”).
e
Press the
[
F/L
]
key to enable adjustment of this Menu item.
f
Rotate the DIAL to select “
T.CALLT.CALL
T.CALLT.CALL
T.CALL” on the display.
g
Press the PTT key to save the new setting and exit to normal operation.
ANI OPERATION
(
AUTOMATIC NUMBER IDENTIFICATION
)
When you activate the ANI feature, the DTMF tones stored in ANI memory will automati-
cally be sent whenever you press the PTT button.
Here is the ANI storage procedure:
c
Press the
[
F/L
]
key, then press the
[
0
(
SET
)
]
key, to enter the Set mode.
d
Rotate the DIAL to select Menu #36 (“
ANIANI
ANIANI
ANI”).
e
Press the
[
F/L
]
key to enable changing of this Menu item.
f
Press the
[
F/L key, then press the
[
F/L
]
key again, to begin entry of the letters and
numbers in the ANI code.
g
Rotate the DIAL to select the first letter or number in the ANI code. When the correct
character has been selected, press the
[
(
MHz
)
]
key to move on to the next character.
h
Repeat step
g
as many times as necessary to complete the ANI code.
i
When you have completed entry of the ANI code, press the
[
F/L
]
key.
j
Press the PTT key to save the settings and exit to normal operation.
To activate the ANI identifier:
c
Press the
[
F/L
]
key, then press the
[
0
(
SET
)
]
key, to enter the Set mode.
d
Rotate the DIAL to select Menu #36 (“
ANIANI
ANIANI
ANI”).
e
Press the
[
F/L
]
key to enable changing of this Menu item.
f
Rotate the DIAL to set the ANI function ON.
g
When you have made your selection, press the PTT key to save the new setting and
exit to normal operation.
Advanced Operation
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-250R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-250R in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info