Manual Yaesu FT-2000D (page 131 of 140) (English)

478497

131

Zoom out

Zoom in

1/140

Page 129FT-2000D OPERATING MANUAL

MENU MODE

137 tAUd PE2 FRQ

Function: Selects the center frequency of the middle range

for the parametric microphone equalizer when the speech

processor is activated.

Available Values: OFF / 700 ~ 1500 Hz (100 Hz/step)

Default Setting: 800 Hz

OFF: The equalizer gain and Q-factor are set

to factory defaults (flat).

700 ~ 1500: Center frequencies of 700 Hz ~ 1500 Hz.

You may adjust the equalizer gain and

Q-factor at this selected audio frequency

via menu items “138 tAUd PE2 LVL”

and “139 tAUd PE2 BW.”

138 tAUd PE2 LVL

Function: Adjusts the equalizer gain of the middle range

of the parametric microphone equalizer when the speech

processor is activated.

Available Values: –20 ~ +10

Default Setting: 0

139 tAUd PE2 BW

Function: Adjusts the Q-factor of the middle range of the

parametric microphone equalizer when the speech proces-

sor is activated.

Available Values: 1 ~ 10

Default Setting: 1

140 tAUd PE3 FRQ

Function: Selects the center frequency of the high range

for the parametric microphone equalizer when the speech

processor is activated.

Available Values: OFF / 1500 ~ 3200 Hz (100 Hz/step)

Default Setting: 2100 Hz

OFF: The equalizer gain and Q-factor are set

to factory defaults (flat).

1500 ~ 3200: Center frequencies of 1500 Hz ~ 3200 Hz.

You may adjust the equalizer gain and

Q-factor in this selected audio fre-

quency via menu items “141 tAUd PE3

LVL” and “142 tAUd PE3 BW.”

141 tAUd PE3 LVL

Function: Adjusts the equalizer gain of the high range of

the parametric microphone equalizer when the speech pro-

cessor is activated.

Available Values: –20 ~ +10

Default Setting: 0

142 tAUd PE3 BW

Function: Adjusts the Q-factor of the high range of the

parametric microphone equalizer when the speech proces-

sor is activated.

Available Values: 1 ~ 10

Default Setting: 1

TX GNRL GROUP

143 tGEn BIAS

Function: Selects the Final Amplifier’s operation between

the “Class-A” and “Class-AB” mode, and adjusts the Bias

level while in “Class-A” operation.

Available Values: Ab “Class-AB”/0 ~ 100 “Class-A”

Default Setting: Ab

144 tGEn MAX PWR

Function: Selects a maximum output power limit.

Available Values: 20/50/100/200 W

Default Setting: 200 W

145 tGEn PWRCTRL

Function: Configures the

[

RF PWR

]

knob.

Available Values: ALL/CAr

Default Setting: ALL

ALL:The

[

RF PWR

]

knob is enabled on all modes.

CAr: The

[

RF PWR

]

knob is enabled in all modes

except SSB. In this configuration, the SSB out-

put power will be set to maximum, regardless of

the

[

RF PWR

]

knob’s position.

146 tGEn ETX-GND

Function: Enables/Disables the TX GND jack on the rear

panel.

Available Values: EnA(ENABLE)/diS(DISABLE)

Default Setting: diS(DISABLE)

147 tGEn TUN PWR

Function: Selects a maximum output power limit for driv-

ing the input circuit of an external linear RF amplifier while

tuning (while using the Remote Control function of the

linear RF amplifier).

Available Values: 20/50/100/200 W

Default Setting: 100 W

148 tGEn VOX SEL

Function: Selects the audio input source for triggering

TX during VOX operation.

Available Values: nic / dAtA

Default Setting: nic

nic(MIC): The VOX function will be activated by

microphone audio input.

dAtA(DATA): The VOX function will be activated

by data audio input.

TX AUDIO GROUP

My FT2000D will not Transmit. Have not used it in over a year. I am sure it is something I have done wrong. Whe u puss PTT the signal goes to ZERO. Please Advise! Submitted on 12-9-2020 at 00:41
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-2000D in the language / languages: English as an attachment in your email.

The manual is 7,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Yaesu FT-2000D Manual

Product: