478497

Yaesu FT-2000D Manual

129
Zoom out
Zoom in
Previous page
1/140
Next page
Page 127FT-2000D OPERATING MANUAL
112 SCP 14.0 FIX
Function: Selects the scan start frequency of the FIX mode
Spectrum Scope while monitoring on the 20 m amateur
band.
Available Values: (1)4.000 - (1)4.349 MHz (1 kHz/step)
Default Setting: (1)4.000 MHz
113 SCP 18.0 FIX
Function: Selects the scan start frequency of the FIX mode
Spectrum Scope while monitoring on the 17 m amateur
band.
Available Values: (1)8.000 - (1)8.199 MHz (1 kHz/step)
Default Setting: (1)8.068 MHz
114 SCP 21.0 FIX
Function: Selects the scan start frequency of the FIX mode
Spectrum Scope while monitoring on the 15 m amateur
band.
Available Values: (2)1.000 - (2)1.449 MHz (1 kHz/step)
Default Setting: (2)1.000 MHz
115 SCP 24.8 FIX
Function: Selects the scan start frequency of the FIX mode
Spectrum Scope while monitoring on the 12 m amateur
band.
Available Values: (2)4.800 - (2)4.989 MHz (1 kHz/step)
Default Setting: (2)4.890 MHz
116 SCP 28.0 FIX
Function: Selects the scan start frequency of the FIX mode
Spectrum Scope while monitoring on the 10 m amateur
band.
Available Values: (2)8.000 - (2)9.699 MHz (1 kHz/step)
Default Setting: (2)8.000 MHz
117 SCP 50.0 FIX
Function: Selects the scan start frequency of the FIX mode
Spectrum Scope while monitoring on the 6 m amateur band.
Available Values: (5)0.000 - (5)3.999 MHz (1 kHz/step)
Default Setting: (5)0.000 MHz
MENU MODE
TUNING GROUP
118 tun DIALSTP
Function: Setting of the Tuning Dial knob’s tuning speed
except the FM and FM-PKT modes.
Available Values: 1 / 5 / 10 Hz
Default Setting: 10 Hz
119 tun CW FINE
Function: Enabling/disabling of the “Fine” tuning speed
in the CW, RTTY, and PKT-SSB modes.
Available Values: EnA (ENABLE) / diS (DISABLE)
Default Setting: diS (DISABLE)
EnA (ENABLE): Tuning in 1 Hz steps on the CW,
RTTY, and PKT-SSB modes.
diS (DISABLE): Tuning according to the steps deter-
mined via menu item “118 tun
DIALSTEP.”
120 tun MHz SEL
Function: Selects the tuning steps for the
[
SUB VFO-B
]
knob when the
[
MHz
]
button is pressed.
Available Values: 1 / 0.1 MHz
Default Setting: 1 MHz
121 tun AM STEP
Function: Selects the tuning steps for the microphone’s
[
UP
]
/
[
DWN
]
keys in the AM mode.
Available Values: 2.5 / 5 / 9 / 10 / 12.5 kHz
Default Setting: 5 kHz
122 tun FM STEP
Function: Selects the tuning steps for the microphone’s
[
UP
]
/
[
DWN
]
keys in the FM and FM-PKT modes.
Available Values: 5 / 6.25 / 10 / 12.5 / 20 / 25 kHz
Default Setting: 5 kHz
123 tun FM DIAL
Function: Setting of the Tuning Dial knob’s tuning speed
in the FM mode.
Available Values: 10 / 100 Hz
Default Setting: 100 Hz
124 tun MY BAND
Function: Programs a band to be skipped while selecting
bands using the
[
SUB VFO-B
]
knob.
Available Values: 1.8 ~ 50 / GE / AU
Default Setting: ---
To program the band to be skipped, rotate the
[
SUB VFO-
B
]
knob to recall the band to be skipped while selecting
bands via the
[
SUB VFO-B
]
knob, then press the
[
ENT
]
button to change this setting to “ON” (a “
dd
dd
d” notation will
replace the “
EE
EE
E” notation). Repeat the same procedures to
cancel the setting (skipped “Off”: “
dd
dd
d” notation appears).
SCOPE GROUP
… 129 …


Need help? Post your question in this forum.

Forumrules
1

Forum

yaesu-ft-2000d

Reset search

  • My FT2000D will not Transmit. Have not used it in over a year. I am sure it is something I have done wrong. Whe u puss PTT the signal goes to ZERO. Please Advise! Submitted on 12-9-2020 at 00:41

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-2000D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-2000D in the language / languages: English as an attachment in your email.

The manual is 7,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info