Manual Yaesu FT-2000D (page 128 of 140) (English)

478497

128

Zoom out

Zoom in

Previous page

1/140

Next page

Page 126 FT-2000D OPERATING MANUAL

104 rdSP SSB SHP

Function: Selects the passband characteristics of the DSP

filter for the SSB modes (LSB and USB).

Available Values: SOFt / ShAP

Default Setting: ShAP

SOFt (SOFT): Primary importance is attached to the

phase of the filter factor.

ShAP (SHARP): Primary importance is attached to the

amplitude of the filter factor.

105 rdSP SSB SLP

Function: Selects the shape factor of the DSP filter for

the SSB modes (LSB and USB).

Available Values: StP(STEEP) / nEd(MEDIUM) /

GEnt(GENTLE)

Default Setting: nEd (MEDIUM)

106 rdSP SSB NAR

Function: Selects the passband of the DSP filter for the

“Narrow” SSB mode.

Available Values: 200 / 400 / 600 / 850 / 1100 / 1350 /

1500 / 1650 / 1800 / 1950 / 2100 / 2250 Hz

Default Setting: 1800 Hz

SCOPE GROUP

ADVICE:

This group’s adjustment has no effect, if the optional DMU-

2000 Data Management Unit is not connected.

107 SCP 1.8 FIX

Function: Selects the scan start frequency of the FIX mode

Spectrum Scope while monitoring on the 160 m amateur

band.

Available Values: 1.800 - 1.999 MHz (1 kHz/step)

Default Setting: 1.800 MHz

108 SCP 3.5 FIX

Function: Selects the scan start frequency of the FIX mode

Spectrum Scope while monitoring on the 80 m amateur

band.

Available Values: 3.500 - 3.999 MHz (1 kHz/step)

Default Setting: 3.500 MHz

109 SCP 5.0 FIX

Function: Selects the scan start frequency of the FIX mode

Spectrum Scope while monitoring on the 60 m amateur

band.

Available Values: 5.250 - 5.499 MHz (1 kHz/step)

Default Setting: 5.250 MHz

110 SCP 7.0 FIX

Function: Selects the scan start frequency of the FIX mode

Spectrum Scope while monitoring on the 40 m amateur

band.

Available Values: 7.000 - 7.299 MHz (1 kHz/step)

Default Setting: 7.000 MHz

111 SCP 10.1 FIX

Function: Selects the scan start frequency of the FIX mode

Spectrum Scope while monitoring on the 30 m amateur

band.

Available Values: (1)0.100 - (1)0.149 MHz (1 kHz steps)

Default Setting: (1)0.100 MHz

MENU MODE

RX DSP GROUP

DSP FILTER PASSBAND

DSP FILTER SHAPE

SOFT

SHARP

STEEP

GENTLE

MEDIUM

1

My FT2000D will not Transmit. Have not used it in over a year. I am sure it is something I have done wrong. Whe u puss PTT the signal goes to ZERO. Please Advise! Submitted on 12-9-2020 at 00:41
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for Yaesu FT-2000D at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-2000D in the language / languages: English as an attachment in your email.

The manual is 7,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info