478463
76
Zoom out
Zoom in
Previous page
1/90
Next page
72 FT-1900R OPERATING MANUAL
“SET
(
MENU
)
M
ODE
REPEA TER SETTING
Activates/Deactivates the Automatic Repeater Shift
feature.
Sets the Repeater Shift direction.
Sets the magnitude of the Repeater Shift.
CTCSS/DCS/EPCS SETTING
Selects the CTCSS/DCS/EPCS Bell Ringer repeti-
tions.
Setting of the DCS code.
Enables/Disables “Inverted” DCS code decoding.
Enables/Disables the Enhanced CTCSS Paging &
Code Squelch function.
Enables/Disables the Answer Back function of the
Enhanced CTCSS Paging & Code Squelch function.
Setting the Receiver Pager Code for the Enhanced
CTCSS Paging & Code Squelch function.
Setting the Transmitting Pager Code for the Enhanced
CTCSS Paging & Code Squelch function.
Enables/Disables the split CTCSS/DCS coding.
Selects the Tone Encoder and/or Decoder mode.
Setting of the CTCSS Tone Frequency.
Enables/Disables the receiver audio output during the
Tone Search Scanner is activated.
Selects the Tone Search Scanner speed.
ARTS™ SETTING
Selects the Beep option during ARTS™ operation.
Selects the Polling Interval during ARTS™ operation.
Enables/Disables the CW identifier during ARTS
Operation.
MEMORY SETTING
Select the Memory Bank for the Memory Bank Link
Scan.
Programming an Alpha/Numeric label for a Memory
Bank.
Selects the method of selection of channels for
Memory Storage.
Programming an Alpha/Numeric label for a Memory
Channel.
Enables/Disable the Band-edge beeper while scan-
ning.
Selects the Memory Scan mode.
SCAN SETTING
Selects the Scan Resume mode.
Selects the Memory Scan mode.
Select the VFO Scanner Width.
DTMF SETTING
Enables/Disables the DTMF Autodialer feature.
Setting of the DTMF Autodialer’s TX Delay Time.
Loading of the DTMF Autodialer Memories.
Setting of the DTMF Autodialer Sending Speed.
AVAILABLE VALUES
(
DEFAULT
)
ON / OFF
RPT / +RPT / SIMP
0.00-99.95
(
MHz
) (
0.60MHz
)
AVAILABLE VALUES
(
DEFAULT
)
1 / 3 / 5 / 8 / CNTNUE / OFF
104 standard DCS codes
(
023
)
ENABLE / DISABL
ON / OFF
ON / OFF
---
(
05
_
47
)
---
(
05
_
47
)
ON / OFF
TONE / TSQL / DCS / RV TN /
OFF
50 standard CTCSS tones
(
100 Hz
)
ON / OFF
FAST / SLOW
AVAILABLE VALUES
(
DEFAULT
)
IN RNG / ALWAYS / OFF
25SEC / 15SEC
ON / OFF
AVAILABLE VALUES
(
DEFAULT
)
---
---
NEXT / LOWER
---
ON / OFF
TAG1 / TAG2 / ALL CH
AVAILABLE VALUES
(
DEFAULT
)
BUSY / HOLD / 3SEC / 5SEC /
10SEC
SKIP /ONLY / OFF
±1MHz / ±2MHz / ±5MHz / ALL
AVAILABLE VALUES
(
DEFAULT
)
MANUAL / AUTO
50 / 250 / 450 / 750 / 1000 (ms)
---
50 / 100 (ms)
SET MODE ITEM
4 ARS
43 RPT
46 SHIFT
SET MODE ITEM
7 BELL
14 DCS CD
15 DCS RV
32PAGER
33 PAG.ABK
34 PAG.CDR
35 PAG.CDT
48 SPLIT
49 SQ TYP
52 TN FRQ
54 TS MUT
55 TS SPD
SET MODE ITEM
2 AR BEP
3 AR INT
11 CW ID
SET MODE ITEM
8 BNK.LNK
9 BNK NM
29 MW MD
30 NM SET
21 EDG.BEP
28 MEM.SCN
SET MODE ITEM
41 RESUME
47 SKIP
56 VFO.SCN
SET MODE ITEM
17 DT A/M
18 DT DLY
19 DT SET
20 DT SPD
76


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-1900R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-1900R in the language / languages: English as an attachment in your email.

The manual is 2,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info