478463

Yaesu FT-1900R Manual

55
Zoom out
Zoom in
Previous page
1/90
Next page
51FT-1900R OPERATING MANUAL
WEATHER ALERT SCAN
This feature allows you to check the Weather Broadcast Memory Channels for the presence
of the NOAA Alert Tone while operating using VFO scan or Memory channel scan.
When the Weather Alert Scan feature is engaged, the FT-1900R will check the Weather
Broadcast Memory Channels for activity every five seconds while scanning. If you watch
the display carefully, you’ll observe the scanner periodically shifting to the Weather Broad-
cast bank, scanning the Weather channels quickly in search of the Alert Tone, after which
regular scanning will resume for another five seconds.
To enable the Weather Alert Scan feature:
1. Press and hold in the
[
MHz
(
SET
)]
key for one second, then
rotate the DIAL knob to select “57 WX ALT.”
2. Press the
[
MHz
(
SET
)]
key, then rotate the DIAL knob to
set this Menu item to “ON.”
3. Press and hold in the
[
MHz
(
SET
)]
key for one second to save the new setting and exit
to normal operation.
4. To disable the Weather Alert Scan feature, select “OFF” in step 2 above.
You can change the Weather Alert Tone volume level to maximum regardless the VOL
knob setting, using Menu item “58 WX VOL.” See page 82 for details.
1) When the Weather Alert Scan feature is engaged, the Scan-Resume mode will
be fixed on “HOLD.”
2) If you are just scanning the Weather Broadcast Channels, the FT-1900R’s receiver
will remain muted indefinitely unless the Alert Tone is received. This yields a long period
of monitoring time, as no power will be consumed via audio output while scanning (for
the Alert Tone) is in progress.
BAND EDGE BEEPER
The FT-1900R will automatically “beep” when the receiver’s band edge is encountered
during scanning (either in standard VFO scanning or during PMS operation). You may
additionally enable this feature (band edge beeper) when the frequency reaches the band
edge while selecting the VFO frequency manually, using the DIAL knob.
The procedure for enabling the Band-Edge Beeper (during manual tuning) is:
1. Press and hold in the
[
MHz
(
SET
)]
key for one second, then
rotate the DIAL knob to select “21 EDG.BEP.”
2. Press the
[
MHz
(
SET
)]
key, then rotate the DIAL knob to
set this Menu item to “ON.”
3. Press and hold in the
[
MHz
(
SET
)]
key for one second to save the new setting and exit
to normal operation.
SCANNING
… 55 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-1900R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-1900R in the language / languages: English as an attachment in your email.

The manual is 2,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info