478463
48
Zoom out
Zoom in
Previous page
1/90
Next page
44 FT-1900R OPERATING MANUAL
BASIC SCANNER OPERATION
Before activating the scanner, make sure that the Squelch is set to silence the background
noise when no signal is present. Scanning is not possible while the Squelch is open (if noise
or signals are being heard).
Scanning may be started or stopped using the microphone’s
[
UP
]
or
[
DWN
]
button. The
following techniques are used for scanning:
Pressing and holding in either the
[
UP
]
or
[
DWN
]
button for one second in the VFO
mode will cause upward or downward band scanning, respectively, to begin.
Pressing and holding in either the
[
UP
]
or
[
DWN
]
button for one second in the Memory
mode will cause memory channel scanning toward a higher- or lower-numbered memory
channel, respectively.
Scanning pauses when a signal opens the squelch, and the decimal point on the display
will blink. You can choose one of three scan-resume modes (described later).
To halt the scan manually, the easiest way is to push the PTT switch on the microphone
momentarily (no transmission will occur while you are scanning). The scan may also be
halted manually by pressing the microphone’s
[
UP
]
or
[
DWN
]
button, or the
[
D/
MR
(
MW
)]
key.
In the factory default setting, the scanner sweeps all frequencies while the VFO
mode and all memory channels while the Memory mode. You may change the
sweep range of the VFO mode to ±1 MHz, ±2 MHz, or ±5 MHz, or sweep only those
Memory Channels with the same “first” or “first” and “second” digits of the alpha/
numeric tag as the first channel on which scanning started, using Set Mode items “28
MEM.SCN” and “56 VFO.SCN.” See pages 77 and 82 for details.
SCANNING
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-1900R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-1900R in the language / languages: English as an attachment in your email.

The manual is 2,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info