478463

Yaesu FT-1900R Manual

42
Zoom out
Zoom in
Previous page
1/90
Next page
38 FT-1900R OPERATING MANUAL
MEMORY TUNING
Once you have recalled a particular memory channel, you may easily tune off that channel,
as though you were in the VFO mode.
1. With the FT-1900R in the Memory Recall mode, select
the desired memory channel.
2. Press the
[
MHz
(
SET
)]
key momentarily. The “MR” indi-
cator will blink and the Memory Channel Number will dis-
appear; these indicates that the “Memory Tuning” mode has been engaged.
3. Rotate the DIAL knob, or press the
[
UP
]
or
[
DWN
]
keys, to tune to a new frequency.
The synthesizer steps you have selected for “VFO” opera-
tion will be the steps used during Memory Tuning.
4. If you wish to return to the original memory frequency, press the
[
D/MR
(
MW
)]
key
momentarily. The “MR” indicator will stop blinking and
the Memory Channel Number will reappear.
5. If you wish to store into memory a new frequency set during Memory Tuning, just press
and hold in the
[
D/MR
(
MW
)]
key for one second, then complete the normal memory
storage procedure. Be sure to select an open memory channel when doing so.
MASKING MEMORIES
There may be situations where you want to “Mask” memories so they are not visible during
memory selection or scanning. For example, several memories used only in a city you visit
infrequently may be stored, then “Masked” until you visit that city, at which time you can
“Unmask” them for normal use. (except for Memory Channel “0,” the Priority Channel,
and the Home Channel).
1. With the FT-1900R in the Memory Recall mode, press and hold in the
[
D/MR
(
MW
)]
key for one second, then rotate the DIAL knob to select the memory channel you wish to
delete.
2. Press the
[
LOW
(
A/N
)]
key momentarily. The display will revert to memory channel
“0.” The previously-selected memory will be “masked.”
3. To Unmask a hidden memory, repeat the above procedure: press and hold in the
[
D/
MR
(
MW
)]
key for one second, rotate the DIAL to select the masked memory’s number,
then press the
[
LOW
(
A/N
)]
key to restore the memory channel’s data.
Watch out! You can manually store data over a “Masked” memory, deleting pre-
vious data, if you’re not careful. Use the “next available memory” technique (look
for the blinking memory channel number) storage technique to avoid over-writing a
masked memory.
MEMORY OPERATION
… 42 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-1900R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-1900R in the language / languages: English as an attachment in your email.

The manual is 2,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info