478463
39
Zoom out
Zoom in
Previous page
1/90
Next page
35FT-1900R OPERATING MANUAL
STORING INDEPENDENT TRANSMIT FREQUENCIES
(
“ODD SPLITS
)
1. Store the receiving frequency using the method already described.
2. Tune to the desired transmit frequency, then press and hold in the
[
D/MR
(
MW
)]
key for
one second.
3. Within five seconds of pressing the
[
D/MR
(
MW
)]
key, use the DIAL knob or micro-
phone
[
UP
]
/
[
DWN
]
buttons to select the same memory channel number used in step 1
above.
4. Press and hold in the PTT switch, and press the
[
D/MR
(
MW
)]
key momentarily while
holding in the PTT switch. This will not cause transmission, but rather it will instruct
the transceiver that you are programming a separate transmit frequency into memory.
Whenever you recall a memory which contains independently-
stored transmit and receive frequencies, the “ ” indication
will appear in the display.
The “Odd Splits” feature can store separate CTCSS/DCS functions for the receive and
transmit frequencies.
When you recall a memory channel which contains independently stored CTCSS/DCS
information, the decoder icon will appear solid, and the en-
coder icon will blink on the display.
To confirm the memorized frequency/code:
1. Press and hold in the
[
MHz
(
SET
)]
key for one second to enter the Set mode.
2. Rotate the DIAL knob to select “14 DCS CD” when the
receiver CTCSS/DCS function is set to “DCS”, or select
52 TN FRQ” when the receiver CTCSS/DCS function is
set to “TONE SQUELCH”.
3. Press the
[
MHz
(
SET
)]
key momentarily to indicate the
memorized frequency/code for the receiver.
4. Press the
[
REV
(
DW
)]
key to indicate the memorized fre-
quency/code for the transmitter. You can confirm the Trans-
mit and Receive TONE/DCS by alternately pressing of the
[
REV
(
DW
)]
key.
MEMORY OPERATION
: Receive tone/DCS
: Transmit tone/DCS
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-1900R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-1900R in the language / languages: English as an attachment in your email.

The manual is 2,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info