478463

Yaesu FT-1900R Manual

36
Zoom out
Zoom in
Previous page
1/90
Next page
32 FT-1900R OPERATING MANUAL
DTMF OPERATION
The Microphone’s 16-button keypad allows easy DTMF dialing for Autopatch, repeater
control, or Internet-link access purposes. Besides numerical digits
[
0
]
through
[
9
]
, the key-
pad includes the
[
]
and
[
#
]
digits, plus the
[
A
]
,
[
B
]
,
[
C
]
, and
[
D
]
tones often used for
repeater control.
MANUAL DTMF TONE GENERATION
You can generate DTMF tones during transmission manually.
1. Press and hold in the
[
MHz
(
SET
)]
key for one second, then
rotate the DIAL knob to select “17 DT A/M.”
2. Press the
[
MHz
(
SET
)]
key, then rotate the DIAL knob to
set this Set Mode Item to “MANUAL” (thus enabling the
Manual DTMF Tone Generation).
3. Press and hold in the
[
MHz
(
SET
)]
key for one second to save the new setting and exit
to normal operation.
4. Press the PTT switch to begin transmission.
5. While transmitting, press the desired numbers on the keypad.
6. When you have sent all the digits desired, release the PTT switch.
DTMF AUTODIALER
Nine DTMF Autodialer memories are available on the FT-1900R. These DTMF Autodialer
memories can store up to 16 digits of a telephone number for repeater autopatch or other use.
To load DTMF Autodialer memories, use the following procedure:
1. Press and hold in the
[
MHz
(
SET
)]
key for one second, then rotate the DIAL knob to
select “19 DT SET.”
2. Press the
[
MHz
(
SET
)]
key, then rotate the DIAL knob to
select the DTMF Autodialer memory channel number into which you wish store a tele-
phone number (“C0” to “C9”).
3. Press the
[
LOW
(
A/N
)]
key momentarily, then rotate the
DIAL knob to select the first digit of the telephone number
you wish to store.
4. When you have selected the correct digit, press the
[
LOW
(
A/N
)]
key momentarily.
Now, rotate the DIAL knob to select the second of 16 available numbers in the current
DTMF Autodialer memory register.
5. Repeat this procedure for each digit in the telephone num-
ber. If you a mistake, press the
[
REV
(
DW
)]
key to move back to the first digit, then re-
enter the correct number.
6. Press and hold in the
[
LOW
(
A/N
)]
key for 2 seconds to delete all data after the cursor
that may have been previously stored erroneously.
7. When entry of all digits is complete, press the
[
MHz
(
SET
)]
key.
… 36 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-1900R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-1900R in the language / languages: English as an attachment in your email.

The manual is 2,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info