478462

Yaesu FT-1802M Manual

17
Zoom out
Zoom in
Previous page
1/88
Next page
15FT-1802M OPERATING MANUAL
BASIC OPERATION
FREQUENCY NAVIGATION
1
)
Tuning Dial
Rotating the DIAL knob allows tuning in the pre-programmed steps. Clockwise rotation of the
DIAL knob causes the FT-1802M to be tuned toward a higher frequency, while counter-clock-
wise rotation will lower the operating frequency.
Press the
[
MHz
(
SET
)]
key momentarily, then rotate the DIAL knob, to change the frequency
steps to 1 MHz per step. This feature is extremely useful for making rapid frequency excursions
over the wide tuning range of the FT-1802M. Instead of pressing the
[
MHz
(
SET
)]
button, you
may also press the
[
A
]
key on the Microphone’s keypad to engage tuning in 1 MHz steps.
2
)
Direct Keypad Frequency Entry
The keypad of the MH-48A6J DTMF Microphone may be used for direct entry of the oper-
ating frequency.
To enter a frequency from the MH-48A6J keypad, just press the numbered digits in the
proper sequence. There is no “decimal point” key on the MH-48A6J keypad. However, there
is a short-cut for frequencies ending in zero: press the
[
#
]
key after the last non-zero digit.
Examples:To enter 146.520 MHz, press
[
1
]
[
4
]
[
6
]
[
5
]
[
2
]
[
0
]
To enter 146.000 MHz, press
[
1
]
[
4
]
[
6
]
[
#
]
If you cannot get the radio to accept the frequency entry, it is possible that the
channel steps are set to an incompatible value (e.g. if you have 25 kHz steps set,
you cannot set a frequency of 146.520 MHz). See page 19 to learn how to change the
channel step size.
3
)
Scanning
From the VFO mode, press the microphone’s
[
UP
]
/
[
DWN
]
keys momentarily to initiate
scanning toward a higher- or lower frequency, respectively. The FT-1802M will stop when
it receives a signal strong enough to break through the squelch threshold. The FT-1802M
will then hold on that frequency according to the setting of the “Resume” mode (Menu “41
SCAN)”; see page 43).
If you wish to reverse the direction of the scan (i.e. toward a lower frequency, instead of a
higher frequency), just rotate the DIAL knob one click in the counter-clockwise direction
while the FT-1802M is scanning. The scanning direction will be reversed. To revert to
scanning toward a higher frequency once more, rotate the DIAL knob one click clockwise.
Press the
[
UP
]
/
[
DWN
]
keys again to cancel scanning. You may also press the PTT button
momentarily; scanning will stop, but you will not transmit until you release the PTT button,
and press it again.
If you have enabled the “Severe Weather Alert” feature, you will occasionally no-
tice “WX” channels interspersed with the regular channels you are scanning. This
is normal, because your radio is constantly monitoring for weather alerts. See page 17.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-1802M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-1802M in the language / languages: English as an attachment in your email.

The manual is 2,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info