674723
13
Zoom out
Zoom in
Previous page
1/56
Next page
DR-2X / DR-2XE Operating Manual 11
RX indicator This indicator shows green when a signal is received and white when there is no signal.
TX indicator This indicator shows red when the repeater transmits and white when there is no transmit.
PRI indicator This indicator shows when the channel is set to the Priority Channel.
CNTL indicator This indicator shows when CH-B is set as the dedicated control channel, and it does not
repeat.
[
REMOTE
]
Displayed in red when remote operation with an external controller is enabled (see page 42).
Displayed in red (blinks) when optional LAN Unit LAN-01A is enabled.
[
A SETUP
]
Touch here to switch the display to set up the frequency on CH-A.
[
B SETUP
]
Touch here to switch the display to set up the frequency on CH-B.
3. Set up Frequency
Set up Dual Receive Frequency
DR-2X/DR-2XE is equipped with dual receive feature that may receive two different frequencies in the VHF
and the UHF Band of Amateur radio bands, so the other uplink and downlink frequency for emergency
communications may be set separately from the normally used frequency.
8
4
3
4
TX
(
downlink
)
RX
(
uplink
)
SETUP RXx.xx TX .x
PANELx.wwwDSP . LAN . .
Status display area
A green bar is displayed during receive when signals are detected.
The bar will not be displayed when the squelch is turned on and the received signal level is below the
squelch level.
VOL/SQL level display
S-meter level display
PO-meter level display
Mode display
Firmware Version Information
RX x.xx: RX-UNIT CPU Firmware Version
TX x.xx: TX-UNIT CPU Firmware Version
PANEL x.xx: PANEL-UNIT CPU Firmware Version
DSP x.xx: DSP-UNIT CPU Firmware Version
LAN x.xx: LAN-UNIT CPU Firmware Version
8
4
3
4
SETUP RXx.xx TX .x
PANELx.wwwDSP . LAN . .
à
*
#
A
B
C
D
Space
ENT
8
. 7
UP LINK
Touch
[
A SETUP
]
to display the CH-A frequency set up screen, then set the uplink and downlink frequency.
Touch the uplink frequency of CH-A, the numeric input popup screen appears. Input the uplink frequency.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu DR-2XE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu DR-2XE in the language / languages: English as an attachment in your email.

The manual is 14,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info