674720
40
Zoom out
Zoom in
Previous page
1/44
Next page
38
14. Installation of the Optional Accessories
Installing the optional Voice Guide Unit FVS-2
1 Turn the DR-1X
[
POWER
]
switch to “OFF”.
2 Disconnect all the cables from the DR-1X.
3 Remove the 4 screws from each side and 7 screws from the
top cover of the DR-1X, then remove the top cover.
Figures in this page show the outline of the DR-1X.
4 Referring to Figure 1, remove the 4 screws from the top
cover of the RX-UNIT, then remove the top cover.
Figure 1
5 Refer to Figure 2 for the mounting location for the FVS-2.
Figure 2
6 Push the FVS-2 (component side up) onto the pins corresponding
to its assigned mounting location on the RX-UNIT.
Gently press the FVS-2 down until it is firmly seated on the
connector.
Figure 3
7 Replace the top cover of the RX-Unit and 4 screws.
8 Replace the top cover of the DR-1X and 15 screws.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu DR-1X-FR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu DR-1X-FR in the language / languages: English as an attachment in your email.

The manual is 14,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info