674720
32
Zoom out
Zoom in
Previous page
1/44
Next page
30
12. Connect to the HRI-200 node station
To use WIRES-X with DR-1X, connect HRI-200 directly to the 10-pin plug on the back of the DR-1X.
Alternatively, there is a method the HRI-200 Node station may be located in a place different from the repeater
site.
Since the repeater site does not normally have a large capacity Internet line, and the HRI-200 must always be
connected to the computer, it may be advantageous to set up the HRI-200 in a different location and uplink it
to the repeater with the Node Station transceiver. It is recommended to downlink and connect to WIRES-X.
For HRI-200 and WIRES-X, please refer to their respective instruction manuals.
RF Link
Link the DR-1X and the node station with the uplink and downlink signals using the DG-ID, WIRES-X may be
operated using the repeater.
Example using the DG-ID “01”:
When the DR-1X and the node station transceiver are set to DG-ID “01”, the downlink signal of the DR-1X is
received only by the node stations with the DG-ID set to “01”. The repeater connects to the Internet when a
signal containing the DG-ID “01” is received on the uplink.
Internet
Local node
PC
WIRES-X Node Station
DR-1X
HRI-200
Setting method
1 Set the DR-1X repeater DG-ID to “01” (see page 14).
2 Set the node station transceiver DG-ID to “01” for both transmit and receive.
For instructions on setting the DG-ID, refer to the transceiver Operating Manual.
3 Set the WIRES-X node station transmit frequency to the uplink frequency of the DR-1X repeater.
4 Set the WIRES-X node station receive frequency to the downlink frequency of the DR-1X repeater.
When the DR-1X repeater is connected to a Node Station with the DG-ID “01”, it downlinks only WIRES-X
signals that include the DG-ID “01”. Communications via the WIRES-X node and the DR-1X repeater are
commenced.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu DR-1X-FR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu DR-1X-FR in the language / languages: English as an attachment in your email.

The manual is 14,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info