674720
25
Zoom out
Zoom in
Previous page
1/44
Next page
23
When controlling remotely with the FTM-3207D
1 Please confirm that the FTM-3207D DP-ID is registered on DR-1X repeater.
2
Tune the transmit frequency of the FTM-3207D to the uplink frequency of the DR-1X.
3 Set the FTM-3207D to the digital mode, then press and hold the “Ûkey on the microphone (MH-48A6JA).
4 “REMOTE” is displayed on the screen of the FTM-3207D, the remote-control is available.
Cancelling the remote-control, press the “Û” key on the microphone (MH-48A6JA).
5 Input the 4-digits remote command by using the numeric key (MH-48A6JA).
Press the “Ûkey on the microphone (MH-48A6JA) to cancel the input command at any point in the process.
6 Press the “#” key on the microphone (MH-48A6JA) to transmit the input command.
7 After transmitting the command, press the “Ûkey on the microphone (MH-48A6JA) to return to the normal
operation.
z If the FTM-3207D firmware is not compatible with the DP-ID function, update to the latest firmware to use the DP-ID
function.
z The latest firmware is available on the YAESU website.
Remote Control for Analog FM
In analog FM mode, the ON/OFF setting of the repeater can be operated remotely.
Remote Control can only be operated from a transceiver* capable of sending a code combining two CTCSS
tones.
*: FT2D/DE, FT1XD/DE, FTM-400XDR/XDE, FTM-100DR/DE, FTM-3200DR/DE, and FTM-3207DR/DE.
1 Set the same code that is registered in the DR-1X into the transceiver that can transmit the two combined
CTCSS tones.
Function Code
Activate the repeater operation The same code as “ACTIVATE” of DR-1X
Deactivate the repeater operation The same code as “DEACTIVATE” of DR-1X
For instructions on setting the codes, refer to the Transceiver Operating Manual.
2 Set the transceiver to the analog FM mode.
3 When the remote operation code is accepted, the CW ID of the operation that has been completed is
transmitted on the repeater downlink frequency.
Description CW ID
When the repeater operation is resumed CW “O” (– – –) is transmitted
When the repeater operation is stopped CW “S” (• • •) is transmitted
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu DR-1X-FR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu DR-1X-FR in the language / languages: English as an attachment in your email.

The manual is 14,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info