478460

Yaesu DMU-2000 Manual

48
Zoom out
Zoom in
Previous page
1/56
Next page
DMU-2000 DATA MANAGEMENT UNITPage 46
MEMORY MODE
It is possible to rotate the antenna automatically to headings, which you store into memory in advance. Use of a Yaesu
Rotator (G-800DXA, G-1000DXA, or G-2800DXA) requires the connection of the optional T9101556 cable to the
connector located on the back of the transceiver.
G
REAT
C
IRCLE
M
AP
/ R
OTATOR
C
ONTROL
FUNCTION
PROGRAMMING BEAM HEADINGS INTO MEMORY
1. Press the
[
KEY4
(
MODE
)]
key, as necessary, to select
the “PRESET” or “MANUAL” mode.
2. Use the techniques learned previously to rotate the
antenna to the desired beam heading.
3. Now press the
[
KEY4
(
MODE
)]
key to select the
“MEMORY” mode.
4. Select the desired memory channel register by using
the
[
KEY2
(
)]
key and
[
KEY3
(
)]
keys, then press
the
[
KEY6
(
MW
)]
key to memorize the programmed
beam heading.
Advice: The maximum number of beam-heading memo-
ries which can be stored is 9.
If you have connected your after-market keyboard to the
DMU-2000, you can append a name (tag) to the memory
channel (maximum: 6 characters). It is often convenient
to enter the callsign of a station, or perhaps a label such as
“Europe” for easy reference. The method of entering the
name tag into a memory is described below.
1. Use the
[
KEY2
(
)]
key and
[
KEY3
(
)]
keys to se-
lect the rotator memory register onto which you wish
to append a name tag.
2. Press the keyboard’s
[
ENTER
]
key; the cursor on the
screen will blink.
3. Use your keyboard to enter the name tag; a maximum
of six characters may be utilized.
MEMORY RECALL
1. Use the
[
KEY2
(
)]
key and
[
KEY3
(
)]
keys to se-
lect the desired location from the rotator memory list.
2. When you briefly press the
[
KEY5
(
MR/ERASE
)]
key,
the rotator will turn to the memorized beam heading.
ERASING MEMORY
1. Use the
[
KEY2
(
)]
key and
[
KEY3
(
)]
keys to se-
lect the rotator memory you wish to erase.
2. Press the
[
KEY5
(
MR/ERASE
)]
key for 2 seconds to
erase the memory’s data.
Note: Once erased, memory data cannot be restored!
“REGULAR COMPASS” DISPLAY
“GREAT CIRCLE MAP” DISPLAY
MANUAL
REFERENCE
[
KEY1
(
xxx
)]
[
KEY2
(
xxx
)]
[
KEY3
(
xxx
)]
[
KEY4
(
xxx
)]
[
KEY5
(
xxx
)]
[
KEY6
(
xxx
)]
[
KEY7
(
xxx
)]
[
KEY8
(
xxx
)]
FT-950
FTDX5000
[
1.8
(
1
)]
[
3.5
(
2
)]
[
7
(
3
)]
[
10
(
4
)]
[
14
(
5
)]
[
18
(
6
)]
[
21
(
7
)]
[
24.5
(
8
)]
FT-2000
FT-2000D
[
F1
(
CH-1
)]
[
F2
(
CH-2
)]
[
F3
(
CH-3
)]
[
F4
(
CH-4
)]
[
F5
(
MEM
)]
[
F6
(
DEC
)]
[
F7
(
P.BACK
)]
[
DISPLAY
]
… 48 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu DMU-2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu DMU-2000 in the language / languages: English as an attachment in your email.

The manual is 2,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info