478460

Yaesu DMU-2000 Manual

9
Zoom out
Zoom in
Previous page
1/56
Next page
DMU-2000 DATA MANAGEMENT UNIT Page 7
4. CHANGING THE LOCATION
(
1
)
Using the World Map
Choose (highlight) the “ZONE” using the
[
KEY1
(
)]
~
[
KEY4
(
)]
keys, then press the
[
KEY7
(
SELECT
)]
key.
The name of the country associated with the highlighted
Time Zone may now be selected using the
[
KEY1
(
)]
~
[
KEY4
(
)]
keys. Press the
[
KEY7
(
SELECT
)]
key
when you have made your selection.
You may now select one of the displayed cities in the
same way. When you have made your choice, press
the
[
KEY7
(
SELECT
)]
key.
Advice: Depending on the country, there may be only one
city (or no cities) listed. In these instances, to modify the
setting, please first select a city name on the list, even if
you do not see the city you want; you may modify the city
name later.
(
2
)
Using the Longitude/Latitude Data
If you know the Longitude/Latitude of the your location,
you may set the location from the Longitude/Latitude data.
Press the
[
KEY6
(
LON/LAT
)]
key. The display
changes as follows.
PLEASE READ THIS FIRST
Press the
[
KEY7
(
SELECT
)]
key, then enter the Lon-
gitude using the
[
KEY1
(
)]
~
[
KEY4
(
)]
keys. Use
the
[
KEY3
(
)]
and
[
KEY4
(
)]
keys to navigate to
each column, then use the
[
KEY1
(
)]
and
[
KEY2
(
)]
keys to select the desired numbers in each column.
Note: The Longitude data is input in decimal form.
The seconds may also be input in sexagenary form.
For example, if you want to input 138 degree 28 min-
utes 15 seconds,
1. Input “13828.00” by using
[
KEY1
(
)]
~
[
KEY4
(
)]
keys.
2. Press
[
KEY4
(
)]
key and move the cursor to the
right side of the column.
3. Input “15.”
4. Press
[
KEY7
(
SELECT
)]
key, and the numeric
(second) will be converted to the decimal number
and the Longitude input is completed.
When entry is complete, press the
[
KEY7
(
SELECT
)]
key again.
Choose (highlight) “LAT” using the
[
KEY1
(
)]
~
[
KEY4
(
)]
keys, then press the
[
KEY7
(
SELECT
)]
key.
Enter the Latitude in the same manner as described above.
When entry is complete, press the
[
KEY7
(
SELECT
)]
key again.
FUNCTION TABS
3. LOCAL TIME SETUP
Press and hold in the FT-2000’s
[
DISPLAY
]
key (or
the
[
ENT
]
key of the FT-950 or FT
DX5000) for more
than two seconds, white letters will appear in the tabs
at the bottom of the screen to indicate various func-
tions, and the FT-2000’s
[
F1
(
CH-1
)]
~
[
F7
(
P.BACK
)]
&
[
DISPLAY
]
keys (or the
[
1.8
(
1
)]
~
[
24.5
(
8
)]
keys of the FT-950 or FT
DX5000) will act
as “Function” keys.
A World Map should be displayed on the monitor. If
the World Map does not appear, press the
[
KEY1
(
MAP
)]
key to get the World Map to display
on the monitor.
Press the
[
KEY8
(
DISPLAY
)]
key to change the ac-
tion of the “Function” keys, then press the
[
KEY1
(
SET
)]
key; the monitor should now show
“LOCAL TIME-1;” this setting has been pre-set for
Japanese time at the factory.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu DMU-2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu DMU-2000 in the language / languages: English as an attachment in your email.

The manual is 2,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info