674718
57
Zoom out
Zoom in
Previous page
1/64
Next page
55
13. FIRMWARE UPDATE
What is needed?
The supplied SD card containing the saved firmware file that may be downloaded at:
http://www.aorja.com/receivers/ar-dv10.html
If the receiver contains a large amount of scan and search data, it is advised to have at least
200MB free space on the card.
Words of caution!
The memory data and systems are very likely to be erased after a firmware update,
therefore it is always advised to first backup the receiver data as follows:
Press and hold the [] button
Press [2]
Press [6] (Note: “SYSTEM” means a complete backup)
Beware, the backup files will always be saved back to the same names, therefore
previous back-up files will be overwritten without warning. Please move previous back-
up files to your PC.
Do not cut the power or remove the SD card while the firmware is being uploaded to the
receiver! This could potentially corrupt system data and make the receiver unusable.
Such a happening would not be covered by the manufacturer warranty.
The firmware is the property of AOR Ltd. and should not be re-distributed, either in its
original form or in any modified form.
AOR will issue firmware updates to fix major bugs and add new functions, whenever
required by our development plan. However, there is no guarantee updates will be made
available at regular intervals.
Update procedure
1. The receiver must be OFF.
2. Lift the rubber cover labeled MicroSD.
3. Insert the SD card containing the update file (for
example 1801C.D10) into the receiver slot. Refer to the
illustration for the SD card’s orientation.
4. Switch the receiver ON.
Make sure there is enough battery power to complete the update. A power interruption
during the update procedure could potentially corrupt system data and make the receiver
unusable. Such a happening would not be covered by the manufacturer warranty.
Wait until the boot procedure is complete and confirm that the SD card icon appears
on the right side of the LCD.
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu AR-DV10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu AR-DV10 in the language / languages: English as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info