674718
51
Zoom out
Zoom in
Previous page
1/64
Next page
49
10.8. OFFSET RECEPTION
AR-DV10 can be easily programmed to shift the receive frequency by a preprogrammed value.
This is useful when receiving two-frequency radio communications, such as a base station
and a mobile station or a relay station, that transmit to each other on two frequencies.
The difference between the two frequencies is the offset frequency.
Access the offset menu as follows:
1. Press [MENU] followed by [ENT].
2. Use [] to select [VFO EDIT], then press [ENT].
3. Use [] to select either [OFFSET F.], then press [ENT].
4. By rotating the dial knob, select a storage number be-
tween 00 and 39, depending on the following scenarios:
00: Offset is disabled
0119: Offset value to be configured manually
2039: Preset of common offset values
5. To enter a negative value, press the [0] key to toggle [+]
to [-].
6. Press the [.] key to select the frequency input area.
7. Input the frequency in MHz, using the keypad numbers,
press [ENT] to validate the entry.
8. Use [] to select [VFO PARAM SET], then press [ENT]
to save the selection.
10.9. REMOTE MODE
The receiver can be remotely controlled from a PC by using serial commands.
The command list can be downloaded on our website.
When the remote mode is active, on the VFO
screen, the [] icon is displayed on the top left of the
LCD.
However. when the MENU-TOP screen is active the
[] icon will be located on the top right of the LCD.
During remote control, all buttons and switches
except the red power switch and [ENT] will be
disabled.
To deactivate remote control, press [ENT].
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu AR-DV10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu AR-DV10 in the language / languages: English as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info