674718
24
Zoom out
Zoom in
Previous page
1/64
Next page
22
Squelch is adjusted as follows:
1. Press the [SQL/MONI] switch on the left side of the receiver, that will select [NSQ:010]
as shown in the illustration on page 21.
Rotate the DIAL knob selector to set the squelch threshold so that the receiver is just
silenced. The squelch is now “closed” and no audio is heard.
2. Press [SQL/MONI] again to return to normal operation.
Note: Do not set the squelch value too high, as a higher number indicates that a greater
signal level is required to open the squelch and weak signals will not be heard.
Monitor function:
The squelch can be temporarily opened by holding the [SQL/MONI] switch pressed. This is
useful to listen for weak signals, where the signal level is close to the noise level.
There are two types of analog squelch:
NSQ (noise squelch) used for FM mode (including all digital modes).
LSQ (level squelch) used for AM, LSB, USB, CW modes.
The receiver automatically selects the appropriate squelch type for optimal performance.
However, if needed the squelch type can be forced as follows:
1. Press [MENU], then press [ENT].
2. Use [] to select [VFO EDIT], followed by [ENT] twice.
3. Rotate the dial knob to select NOISE or LEVEL.
4. Press [ENT] to validate the setting.
5. Activate the settings using [] to move to line 9, VFO
PARAM SET and press [ENT].
5.8. TUNING STEP
A tuning step is the rate the frequency will be incremented per click when rotating the dial
selector knob.
Tuning step value
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu AR-DV10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu AR-DV10 in the language / languages: English as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info