574682

Y-cam Bullet HD 1080 Manual

35
Zoom out
Zoom in
Previous page
1/68
Next page
Page 35
Camera Setting Options
[Brightness] The image brightness can be adjusted in the range 0-100, where a higher value produces a brighter image.
[Contrast] The image contrast can be adjusted in the range 1-5, where a higher value produces more difference in
brightness between adjacent areas.
[Hue] The image hue can be adjusted in the range 0-100, where a higher value produces more stimulus on the image.
[Saturation] The image saturation can be adjusted in the range 0-100, where a higher value produces more neutral
image.
[Mirror] Displays a mirrored view of the video.
[Flip] Display video upside down – useful if you have installed the camera upside down.
[Enable white balance] Enable or disable white balance
[White balance mode]
This is used to compensate for the different colours present in different light sources, to make the
colours in the image appear in the same colour temperature. The Network Camera can be set to automatically identify the
light source and compensate for its colour. Alternatively, the type of light source can be manually selected from the drop-
down list.
[AE Mode]
The auto-exposure sense area for entire camera image can be set according to needs to configuration from the
drop-down list.
[Exposure]
Two options: 50Hz & 60Hz. This should be set according to the mains frequency of the country the camera is
being used in. For UK this would be 50Hz. For the USA this would be 60Khz.
[Max Exposure time]
Select the exposure time for the camera for the duration of the time that gets into the sensor. The
exposure time can be adjusted in the range 1/25 – 1/10000.
[Max Gain]
Select the level gain control for the camera. Max Gain can be adjusted in the range 0-100.
[Gamma] Configuration grayscale depth degree.
[WDR] Enable or disable Wide Dynamic Range
[ICR] IR is present naturally in day light, this can cause discolouration of images where the greens can look purplish. The
IR cut filter blocks these IR lights from coming back onto the lens of camera, and this gives a true day image.
However, if the IR cut filter is on during night, the night vision will not work. It is recommended to leave the IR cut filter
control to Auto – Light Sensor at all times, to achieve best results from the camera.
[B/W Mode] “By IR Type” switches the video from colour to monochrome when the IR LEDs are turned on. “B/W”
switches the video to monochrome irrelevant of the status of the IR LEDs. “Colour” forces the Y-cam to stay in colour
mode even when the IR LEDs are on.
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Y-cam Bullet HD 1080 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Y-cam Bullet HD 1080 in the language / languages: English as an attachment in your email.

The manual is 2,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info