574682
13
Zoom out
Zoom in
Previous page
1/68
Next page
Page 13
3.12 Using Cable connect
1) Loose the back cover by removing the 3 screws on the back cover
2) Disconnect the Ethernet, power and terminal block wires on the supplied cable from the main board
3) Remove the supplied cable from the back cover by loosening the plastic connector at the back.
4) Disassemble the supplied ½” conduit gland included
5) Pull the network and power cable through the flex conduit (not included)
6) Thread through the outside part of the conduit gland with the flex conduit
7) Attach the inner part of the conduit gland to the back cover
8) Pull the network and power cable through the back cover of the camera
9) Connect the flex conduit to the back cover and tighten the conduit gland
10) Plug the network and power cable into the camera’s internal Ethernet and power connector
11) Replace the desiccant with new one supplied.
12) Re-attach back cover
13) Secure the Network Camera to the wall/ceiling by the supplied camera stand
1
2
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Y-cam Bullet HD 1080 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Y-cam Bullet HD 1080 in the language / languages: English as an attachment in your email.

The manual is 2,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info