Manual XtremeMac Luna Voyager (page 5 of 18) (English, French, Spanish)

496945

Zoom out

Zoom in

1/18

8 9

4. Use the control wheel to set the minutes and press the clock

button to accept and save your changes.

Note: Make sure the time switch on the back of the unit is set to SET to save your

changes. Otherwise once you dock your device the unit will automatically set the

time from the device.

settIng tHe aLaRM

1. Press and hold the alarm button on the top of the unit until the

time on the display begins to blink.

2. Use the control wheel on the top of the unit to adjust the hour,

AM or PM (indicated by an “A” or “P” next to the time for 12 hour

mode) and press the alarm button to advance to the minutes.

3. Use the control wheel to set the minutes and press the alarm

button to accept and save your changes. The display will then

show the volume level (L 5-20).

4. Use the control wheel to set the volume to the desired wake

level and press the alarm button to accept and save your

changes. The display will then show the time.

5. Press the alarm button to activate the alarm and select the

alarm source – the display will show the alarm time. Press

the alarm button while in this mode to switch between iPod,

buzzer and off. The selected source will remain on the display

to indicate the alarm is set.

Note: If iPod is selected as the source and there is no iPod present, the alarm will

automatically default to buzzer.

Snoozing the alarm

While the alarm is sounding, slightly rotate the control wheel to

snooze the alarm. The snooze is automatically set for 10 minutes.

Turning off the alarm

While the alarm is sounding, press the alarm button once to turn

the alarm off and reset for the following day.

When the alarm is not sounding, press the alarm button until you

do not see a source on the display. This means the alarm is off and

will not sound the following day.

UnPackIng anD InItIaL setUP

1. Remove Luna Voyager from the box and remove all foam and

protective plastic. Properly dispose of all material.

2. Place Luna Voyager on a level surface following the

precautions listed in the safety warnings.

3. Remove AC adapter from the packaging.

4. Read and review manual and safety warnings.

5. Open battery compartment cover on the bottom of the unit

and insert two “AAA” batteries for alarm and time backup and

close cover.

6. Connect the AC adapter into the jack on the back of the unit

labeled power and connect the other end of the adapter into a

power outlet.

7. Select the appropriate dock adapter for your device and

carefully insert into the dock well. Each dock adapter is labeled

with compatible device on the bottom left corner of each

adapter. Please see the section “Inserting and removing the

dock adapters” later in the manual for more details.

settIng tHe tIMe WItH tHe DeVIce

Set the time switch on the back of the unit to AUTO and then dock

your iPhone or iPod. The unit will automatically set the time from

your device. Make sure to set the clock mode switch on the back of

the unit to 12 or 24 hour depending on your preference.

Note: If you are experiencing difﬁculties getting the unit to set the time from your

device remove the device, set the switch to AUTO and then dock your device into

the unit again. If you are still experiencing difﬁculties, restart your iPhone or iPod

and repeat the process.

settIng tHe tIMe ManUaLLY

1. Set the clock mode switch on the back of the unit to 12 or 24 to

set the clock into 12 hour or 24 hour mode depending on your

preference.

2. Press and hold the clock button on the top of the unit until the

time on the display begins to blink.

3. Use the control wheel on the top of the unit to adjust the hour,

AM or PM (indicated by an “A” or “P” next to the time for 12

hour mode) and then press the clock button to advance to the

minutes.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of XtremeMac Luna Voyager in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

XtremeMac Luna Voyager Manual

Product: