Manual Xterra TR800 TREADMILL (page 24 of 28) (English)

587188

Zoom out

Zoom in

1/28

TR800 Treadmill

The treadmill is designed so that the tread-belt remains reasonably centered while in use. It

is normal for some belts to drift near one side while in use, depending on a user’s gait and if

they favor one leg. But if during use the belt continues to move toward one side, adjustments

are necessary.

SETTING TREAD-BELT TRACKING

An 6mm Allen wrench is provided for this adjustment. Make tracking adjustments on the left

side bolt. Set belt speed at 3 mph. Be aware that a small adjustment can make a dramatic

difference which may not be apparent right away.

If the belt is too close to the left side, then turn

the bolt only a 1/4 turn to the right (clockwise) and

wait a few minutes for the belt to adjust itself.

Continue to make 1/4 turns until the belt

stabilizes in the center of the running deck.

If the belt is too close to the right side, turn the

bolt counter-clockwise. The belt may require

periodic tracking adjustment depending on use

and walking/running characteristics. Some users may affect tracking differently. Expect to

make adjustments as required to center the tread-belt. Adjustments will become less of a

maintenance concern as the belt is used. Proper belt tracking is an owner responsibility

common with all treadmills.

ATTENTION

Damage to the running belt resulting from improper tracking / tension adjustments is not

covered under the XTERRA Fitness warranty.

Treadbelt Tracking Adjustment

Belt/Deck Lubrication Procedure

First, you want to clean between the belt and deck to remove any debris that may be trapped.

Use a clean, non-fraying rag, t-shirt, or light towel. Halfway between the end of the treadmill

and motor cover, shove the garment under the belt until you can grasp it on both sides of the

belt. Drag the garment the length of the entire belt 1-2 times. Remove the garment.

Do not lubricate with anything other than XTERRA Fitness approved lubricant. Your treadmill

comes with one tube of “Lube” and extra tubes can be ordered directly from

www.xterratness.com.

Keeping the deck lubricated at the recommended intervals ensures the longest life possible

for your treadmill. If the lubricant dries out, the friction between the belt and deck rises and

places undue stress on the drive motor, drive belt and electronic motor control board, which

could result in failure of these components. Failure to lubricate the deck at regular intervals

may void the warranty.

Speed sensor dirty from Sheetrock work done in house where is it locate and how do I clean it? Submitted on 28-3-2023 at 02:19
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Xterra TR800 TREADMILL in the language / languages: English as an attachment in your email.

The manual is 3,25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Xterra TR800 TREADMILL Manual

Product: