Manual Xterra TR6.3 TREADMILL (page 12 of 28) (English)

587180

Zoom out

Zoom in

1/28

TR6.3 TREADMILL

OWNER’S MANUAL

PLEASE CAREFULLY READ THIS ENTIRE MANUAL BEFORE OPERATING YOUR NEW TREADMILL

Table Of Contents

ATTENTION

THIS TREADMILL IS INTENDED FOR RESIDENTIAL USE ONLY AND IS WARRANTED

FOR THE APPLICATION. ANY OTHER APPLICATION VOIDS THIS WARRANTY IN ITS

ENTIRETY.

Product Registration

Important Safety Instructions

Important Electrical Instructions

Important Operation Instructions

TR6.3 Assembly Instructions

Operation of Your Console

Programmable Features

Heart Rate

General Maintenance

Manufacturer’s Limited Warranty

Vacuum Under

Motor Cover &

Check Wiring

(Every Other

Month)

Clean & Inspect Deck

for Lubrication

(Every Other Month)

Lubricate Deck

(Every 90 hours

or sooner if dry)

Inspect Belt Tracking

(Monthly) Adjust if

necessary

Date

Preventative Maintenance Chart

TR6.3 Treadmill

Record Your Serial Number

Please record the Serial Number of this tness product

in the space provided below.

Serial Number

The self-addressed product registration card must be completed in full and returned to

XTERRA Fitness. You can also go to www.xterratness.com/warrantyreg.html

to register online.

Thank you for your purchase of this quality treadmill from XTERRA Fitness. Your new

treadmill has been manufactured by one of the leading tness manufacturers in the world

and is backed by one of the most comprehensive warranties available. XTERRA Fitness will

do all we can to make your ownership experience as pleasant as possible for many years

to come. If you have questions, or if parts are missing or damaged, or you require customer

service, call (870) 336-4286. Please have your model number and serial number handy when

you call.

Please take a moment at this time to record below the name of the dealer, their telephone

number, and the date of purchase for easy contact in the future. We appreciate your

condence in XTERRA Fitness and we will always remember that you are the reason that we

are in business. Please complete and mail your registration card today and enjoy your new

treadmill.

Yours in Health,

XTERRA Fitness

Congratulations On Your New Treadmill and Welcome to the XTERRA Fitness Family!

Product Registration

TR63_20130605

Purchase Location

Purchase Date

TR6.3 Treadmill

WARNING - To reduce the risk of burns, re, electric shock, or injury to persons, install the treadmill on a at

level surface with access to a 120-volt, 15-amp grounded outlet.

DO NOT USE AN EXTENSION CORD UNLESS IT IS 14AWG OR BETTER, WITH ONLY ONE OUTLET ON

THE END. The treadmill should be the only appliance in the circuit in which it is connected. DO NOT ATTEMPT

TO DISABLE THE GROUNDED PLUG BY USING IMPROPER ADAPTERS, OR IN ANY WAY MODIFY THE

CORD SET. A serious shock or re hazard may result along with computer malfunctions.

• To disconnect, turn all controls to the off position, remove tether cord, then remove the plug from the outlet.

• Do not operate equipment on deeply padded, plush or shag carpet. Damage to both carpet and equipment

may result. You can purchase a oor mat directly from www.xterratness.com.

• Before beginning this or any exercise program, consult a physician. This is especially important for persons

over the age of 35 or persons with pre-existing health conditions.

• Do not block the rear of the equipment. Provide a minimum of 3 1/2 feet clearance between the rear of the

equipment and any xed object.

• Keep hands away from all moving parts.

• Use handrails provided; they are for your safety.

• The pulse sensors are not medical devices. Various factors, including the user’s movement, may affect the

accuracy of heart rate readings. The pulse sensors are intended only as exercise aids in determining heart

rate trends in general.

• Do not attempt to use your equipment for any purpose other than for the purpose it is intended.

• Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for use on your

equipment. Quality athletic shoes are recommended to avoid leg fatigue.

Important Safety Instructions

When using an electrical appliance, basic precautions should always be followed, including the following:

Read all instructions before using this appliance.

DANGER - To reduce the risk of electric shock:

1. Always unplug this appliance from the electrical outlet immediately after using and before cleaning.

WARNING - To reduce the risk of burns, re, electric shock, or injury to persons:

1. An appliance should never be left unattended when plugged in. Unplug from outlet when not in use, and

before putting on or taking off parts.

2. Do not operate under blanket or pillow. Excessive heating can occur and cause re, electric shock, or injury

to persons.

3. Close supervision is necessary when this appliance is used by, on, or near children or disabled persons.

4. Use this appliance only for its intended use as described in this manual. Do not use attachments not

recommended by the manufacturer.

5. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been

dropped or damaged, or dropped into water. Return the appliance to a service center for examination and

repair.

6. Do not carry this appliance by supply cord or use cord as a handle.

7. Keep the cord away from heated surfaces.

8. Never operate the appliance with the air openings blocked. Keep the air openings free of lint, hair, and the

like.

9. Never drop or insert any object into any opening.

10. Do not use outdoors.

11. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.

12. Connect this appliance to a properly grounded outlet only.

13. The appliance is intended for household use.

SAVE THESE INSTRUCTIONS - THINK SAFETY!

Fitness Equipment Safety Instructions

Failure to follow all guidelines may compromise the effectiveness of the exercise experience, expose

yourself (and possibly others) to injury, and reduce the longevity of the equipment.

TR6.3 Treadmill

Important Electrical Information

WARNING!

NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. As with any appliance with a

large motor, the GFCI will trip often. Route the power cord away from any moving part of the treadmill including

the elevation mechanism and transport wheels.

NEVER remove any cover without rst disconnecting AC power. If voltage varies by ten percent (10%) or more,

the performance of your treadmill may be affected. Such conditions are not covered under your warranty. If

you suspect the voltage is low, contact your local power company or a licensed electrician for proper testing. See

Diagnosis Guide, page 23.

NEVER expose this treadmill to rain or moisture. This product is NOT designed for use outdoors, near a pool or

spa, or in any other high humidity environment. The temperature specication is 40 degrees celsius, and

humidity is 95%, non-condensing (no water drops forming on surfaces).

Circuit breakers: Some circuit breakers used in homes are not rated for high inrush currents that can occur

when a treadmill is rst turned on or even during normal use. If your treadmill is tripping the house circuit breaker

(even though it is the proper current rating) but the circuit breaker on the treadmill itself does not trip, you will

need to replace the home breaker with a high inrush type. This is not a warranty defect. This is a condition we as

a manufacture have no ability to control. This part is available through most electrical supply stores. Examples:

Grainger part # 1D237, or available online at www.squared.com part # QO120HM.

Grounding Instructions

This product must be grounded. If the treadmill’s electrical system should malfunction or breakdown

grounding provides a path of least resistance for electric current, reducing the risk of electric shock. This

product is equipped with a cord having an equipment-grounding plug. The plug must be plugged into an

appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

DANGER - Improper connection of the equipment-grounding conductor can result in a risk of electric shock.

Check with a qualied electrician or serviceman if you are in doubt as to whether the product is properly

grounded. Do not modify the plug provided with the product if it will not t the outlet; have a proper outlet

installed by a qualied electrician.

This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illustrated

below. A temporary adapter that looks like the adapter illustrated below may be used to connect this plug to a

2-pole receptacle as shown below if a properly grounded outlet is not available. The temporary adapter should

be used only until a properly grounded outlet, (shown below) can be installed by a qualied electrician. The

green colored rigid ear-lug, or the like, extending from the adapter, must be connected to a permanent ground

such as a properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal

screw.

TR6.3 Treadmill

Important Operation Instructions

• NEVER operate this treadmill without reading and completely understanding the results of any

operational change you request from the computer.

• Understand that changes in speed and incline do not occur immediately. Set your desired speed on the

computer console and release the adjustment key. The computer will obey the command gradually.

• NEVER use your treadmill during an electrical storm. Surges may occur in your household power

supply that could damage treadmill components.

• Use caution while participating in other activities while walking on your treadmill; such as watching

television, reading, etc. These distractions may cause you to lose balance or stray from walking in the

center of the belt, which may result in serious injury.

• NEVER mount or dismount the treadmill while the belt is moving. XTERRA Fitness treadmills start with

at a very low speed and it is unnecessary to straddle the belt during start up. Simply standing on the

belt during slow acceleration is proper after you have learned to operate the unit.

• ALWAYS hold on to a handrail or hand bar while making control changes (incline, speed, etc.).

A safety tether cord is provided with this unit. It is a simple magnetic design that should be used at all times. It

is for your safety should you fall or move too far back on the tread-belt. Pulling this safety tether cord will stop

tread-belt movement.

To Use:

1. Place the magnet into position on the round portion of the console control head. Your treadmill will not start

and operate without this. Removing the magnet also secures the treadmill from unauthorized use.

2. Fasten the plastic clip onto your clothing securely to assure good holding power. Note: The magnet has

strong enough power to minimize accidental, unexpected stopping. The clip should be attached

securely to make certain it does not come off. Be familiar with its function and limitations. The

treadmill will stop, depending on speed, with a one to two step coast anytime the magnet is pulled

off the console.

Safety Tether Cord

Remove tether cord after use to prevent unauthorized treadmill operation.

TR6.3 Treadmill

#94. 5/16”

Curved Washer

(2 pcs)

#93. 5/16” x 15mm

Button Head Socket

Bolt (8 pcs)

Hardware Steps 3

Hardware Steps 5

#90. 5/16” x 3/4”

Button Head Socket Bolt

(4 pcs)

#82. Ø8mm x 1.5T

Split Washer

(4 pcs)

Hardware Steps 6

#95. M5 x 10mm

Phillips Head Screw

(2 pcs)

#88. 5 x 16mm

Tapping Screw

(4 pcs)

#132. M5

Speed Nut Clips

(4 pcs)

#97. M6 L Allen Wrench

Assembly Tools

#96. Combination M5 Allen

Wrench & Phillips Head

Screw Driver

TR6.3 Assembly Pack Checklist

TR6.3 Treadmill

1. Remove all the parts from the carton and lay the Main Base Frame on a

at level surface.

TR6.3 Assembly Instructions

Main Base Frame

Covers & Cables

1. Slide the plastic covers (R-42 & L-43) over the Left and Right Console

Mast Upright Tube.

2. Connect the Upper Cable (38) to the Lower Cable (39).

TR6.3 Treadmill

Upright Tubes

1. Attach and center a Speed Nut Clip (132) over the open hole of base

frame.

2. Slide the Right Console Mast Tube (4) into the Base Frame. Gently pull

up the Computer Cable that exits the top of the tube as you slide it in to

prevent pinching the cable. If the cable is pinched and partially severed,

the treadmill’s electrical system won’t function properly. Repeat the

process on the left side (you don’t have to worry about a cable on this

side).

3. Partially tighten all six Button Head Bolts (93) that are inserted from the

sides, and two Curved Washers (94) and two Button Head Bolts (93)

from the front with the Combination Allen Head Wrench & Phillips Head

Screw driver (96). Don’t fully tighten these until the Console is attached.

93 93

132

Hardware Step 3

#93. 5/16” x 15mm

Button Head Socket

Bolt (8 pcs)

#94. 5/16”

Curved Washer (2 pcs)

#132. M5

Speed Nut Clips

(4 pcs)

TR6.3 Treadmill

Cables

1. This step is easier if you have someone else helping to hold the console

while you connect the wires. Connect the computer cable (38) to the

mating connector (37) of the console.

2. Connect the cables (127) to mating cables (53) on the right side.

3. Connect the cable (152) to the mating cable (131).

4. Connect the cables (128) to mating cables (54).

127

128

152

131

Console Assembly

5Hardware Step 5

#82. Ø8mm x 1.5T

Split Washer (4 pcs)

#90. 3/8” x 3/4”

Button Head Socket

Bolt (4 pcs)

1. To attach the console, insert four Washers (82) and four Button Head

Socket Bolts (90) underneath the console. Tighten using the

Combination Allen Wrench & Phillips Head Screw Driver (96).

TR6.3 Treadmill

Covers

6Hardware Step 6

#88. 5 x 16mm

Tapping Screw

(4 pcs)

#95. M5 x 10mm

Phillips Head Screw

(2 pcs)

1. Go back and fully tighten the six Button Head Bolts that connect the Left

and Right Console Mast Tubes to the Base Frame using the

Combination Allen Wrench & Phillips Head Screwdriver (96).

2. Attach the Console Mast Covers to the Upright Tubes (42 & 43) with four

Tapping Screws (88) & two Phillips Head Screws (95). Tighten using the

Combination Allen Wrench & Phillips Head Screw Driver (96).

TR6.3 Treadmill

The treadmill is equipped with four transport wheels that are engaged when the treadmill is

folded. After folding simply roll the treadmill away.

CAUTION: Do not attempt to move the unit unless it is in the folded and locked position.

Remove the power cord from the front of the unit to avoid possible damage. Use both

handrails to maneuver the unit to the desired position.

Transportation Instructions

TO FOLD THE TREADMILL

Make certain the treadmill is at minimum incline. Lift the treadmill running deck until it is

secured by the locking telescoping tube assembly on the right side of the base. You will

hear it pop into place when secure.

TO UNFOLD THE TREADMILL

Apply slight forward pressure* on the treadmill running deck with your left hand. Pull out

on the round knob and slowly lower the running deck to the oor. The deck will lower

unassisted when it reaches about waist high.

*At the rear roller area to relieve pressure on the locking system.

Folding Instructions

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Xterra TR6.3 TREADMILL in the language / languages: English as an attachment in your email.

The manual is 2,38 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Xterra TR6.3 TREADMILL Manual

Product: