Manual Xterra TR3.0 TREADMILL (page 11 of 28) (English)

587178

Zoom out

Zoom in

1/28

TR3.0 Treadmill

Final Process

1. The nal step will be to plug the power cord into the treadmill and the

other end into the wall outlet. Flip the power switch, located near the

power cord on the treadmill, to the ON position. Make sure the Safety

Tether Cord is properly attached and in place and press START. Run the

calibration procedure

2. The belt tension should be set correctly out of the box. If you notice the

belt slipping while you step on it or sliding to the side, it will need to be

adjusted. Follow the procedures listed in the Treadbelt Tracking

Adjustment Section near the end of this manual to make the proper

adjustments.

103

Calibration Procedure

To start calibration, hold the Start and Speed 5 keys for ve seconds while installing the safety key.

Calibration procedures:

1. The display will ask for grade return. This will reset the incline to zero. Use the Speed

5/6 keys

to set ON (in the calories window) and press Enter to go to the next setting.

2. The message window will now be showing the setting for English (miles) or Metric (Kilometers).

Use the

5/6 keys to select and press Enter.

3. The message window will ask to adjust the wheel size for calibration. Adjust to 60 and

press Enter.

4. The display will show a number for the lowest speed setting (for miles the number should be 0.5).

Adjust the low speed setting with the

5/6 keys and press Enter.

5. The display will show a number for the top speed setting (for Miles it should be 10.0). Adjust the

high speed setting with the

5/6 keys and press Enter.

6. The display will ask for the top incline setting. Set to 10 and press Enter.

7. Press Start to begin calibration. Be Careful! This is an automatic process, the belt will move

and change speeds without warning. When calibration is done, the console will return to the

start-up screen.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Xterra TR3.0 TREADMILL in the language / languages: English as an attachment in your email.

The manual is 1,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Xterra TR3.0 TREADMILL Manual

Product: