800738
4
Zoom out
Zoom in
Previous page
1/44
Next page
4 | Instructions for use – Stand-up paddleboard
- Prepare a round patch with repair material with
correct measurements.
- Clean the repair material and the area around the
leak with alcohol.
- Apply 3 thin, even coats of glue to both the surface
of the board and the repair material. Wait 5
minutes between each coat.
- After the 3rd coat, wait 10-15 minutes before
applying the repair material. Use a handroller
to apply the repair material evenly. Pay special
attention to the edges.
- Wait at least 24 hours before re-inating.
- Many tutorials on social media regarding SUP
repairs.
5
HOW TO USE THE VALVE WRENCH TO FIX
LEAKAGE PROBLEMS IN VALVE LOCATION:
A. Deate the board until the top and bottom skin
(PVC) have collapsed.
B. Grab the valve base (3) with your hand through
the bottom layer and hold steady while inserting
the valve tightening wrench (1) into the valve top
(2) and turn the wrench rmly clockwise until
proper sealing is guaranteed.
C. If tightening of valve top (2) was still not
successful unscrew the valve top (2) entirely
turning it counterclockwise and inspect the PVC
opening hole for any wrinkles, tears or debris.
D. If the PVC opening hole looks intact add a thin
layer of repair adhesive (PVC glue) onto the PVC.
E. Tighten the valve as described in B and let the
glue dry in a warm well-ventilated area for 24
hours.
F. After 24 hours inate the SUP to 15PSI and leave
inated for 72 hours to check for air leakage.
6
ADDITIONAL INFO
WHAT IS DROPSTITCH MATERIAL?
All inatable SUP Boards use drop stitch. This
technology ensures that the bottom and top of a
SUP remain connected to each other. Drop stitch
is the technology used to produce a Stand Up
Paddle Board. Hundreds of threads that connect
the top and bottom of a SUP form the drop-stitch
technology. These wires ensure that an inatable
supboard remains in its original form, even under
high pressure.
DEFORMATION
As drop-stitch material is sewed vertically with threads,
there is always 1 place on the SUP with a deformation.
This deformation, can be explained logically by the
placement of the valve. Due-to-the valve, no “DROP-
STITCH wires” are present at this location. This, is a
deformation inherent to the design of the SUP and does
not have any impact on the quality.
AIRBUBBLES UNDER THE EVAPAD
The SUPs EVA-PAD can contain 1 or several groups
of tiny bubbles. As this product is completely
handmade, this is completely normal. The layers of
PVC and EVA are glued together by hand. Although
the production process is in a dust-free area some
small particles can settle on the PVC during
manufacturing. These air bubbles are cosmetic, and
will not grow or aect the performance of your SUP
board.
NL INSTRUCTIE
Deze gebruiksaanwijzing dient zorgvuldig
te worden gelezen en opgevolgd. Als u het product
aan derden geeft, dient u ook deze documenten te
overhandigen. Volg de juiste volgorde op voor het
oppompen / leeglaten van het SUP board.
INHOUD
1 Opblaasbaar SUP board
1 Rugzak
1 Aluminium in lengte verstelbare peddel
1 Hand Pomp
1 Koord.
1 afneembare vin
1 Reparatie set
1
1. H3 Ventiel
2. Koord voorzijde
3. EVA Antislip bekleding
4. Handgreep
5. Metaal ring
6. Afneembare vin
WAARSCHUWING
-
Stand up peddelen kan zeer gevaarlijk en fysiek
veeleisend zijn. De gebruiker van dit product moet
begrijpen dat deelnemen in stand up peddelen serieuze
verwondingen of de dood tot gevolg kan hebben.
- Raadpleeg een gecerticeerde of gelicenseerde
instructeur voor de juiste instructies.
- Check altijd eerst de weerverwachtingen alvorens
het SUP board te gaan gebruiken. Gebruik het SUP
board nooit bij storm en bliksem.
- Gebruik altijd geschikte beschermende kleding
en draag een zwemvest. Draag de correcte
beschermende kleding voor de betreende
weersconditie zoals een wetsuit of UV top. Koud
water en koud weer kan leiden tot onderkoeling.
Draag altijd legitimatie bij u.
- Draag een helm wanneer nodig.
- Overschrijd het maximale draagvermogen van 150
kg niet.
- Gebruik het SUP board niet onder invloed van
drugs en/of alcohol.
- Dit model SUP board is ontworpen voor gebruik in
vlakke wateren (meren, rivieren, kust) in staande
of zittende positie. Het is niet aanbevolen om het SUP
board te gebruiken in hoge golven, of om te surfen.
- Pas op voor aandige wind en stromingen die u
verder mee de zee op kan nemen.
-
Kijk de uitrusting altijd helemaal na op tekenen van
slijtage, lekkage of andere beschadigingen voor gebruik.
- Bescherm het item tegen extreme hitte, kou,
vochtigheid en zonnestralen.
- Bind bij geleverd koord altijd vast aan het SUP
board voor gebruik.
- Kinderen moeten altijd onder toezicht zijn van een
volwassene.
- Informeer altijd iemand over uw peddel route,
de tijd en plaats van vertrek, en uw voorgenomen
tijd en plaats van aankomst. Alleen peddelen is
niet aanbevolen.
- Kijk uit voor andere strandbezoekers, speciaal
zwemmers en kinderen. Zorg er altijd voor dat uw
het SUP board en de peddel onder controle heeft.
- Laat uw SUP board nooit langdurig op een warme
ondergrond liggen, zoals op het strand of op
andere warme oppervlakken. Dit kan uw bord
beschadigen.
- Het artikel volgens lokale, actuele voorschriften bij
een inzamelpunt afvoeren.
VOORBEREIDINGEN OM HET SUP BOARD OP TE
POMPEN
Verwijder alle scherpe en puntige objecten van de
ondergrond om beschadigingen aan het SUP board
te voorkomen.
HANDLEIDING / OPBLAZEN / LEEGLATEN
Blaas het SUP board op met bijgeleverde handpomp.
2
1. Ventieldop
2. Knop
3. Ventielbasis
-
Schroef de ventiel dop los
1
. Druk het knopje
2
in
en draai deze ongeveer 90 graden zodat het knopje
uitsteekt.
- Bevestig de pomp op het ventiel en blaas deze op
tot de vereiste druk bereikt is. Draai de ventiel dop
dicht (rechtsom). Alleen de ventieldop kan zorgen
voor de denitieve luchtdichtheid.
- Om lucht uit het SUP board te laten, verwijder de
ventieldop 1 druk op het knopje 2 en draai deze
ongeveer 90 graden zodat het knopje naar binnen
gedrukt blijft.
De juiste druk voor het SUP board is maximum
1 bar / 15 PSI (=1000 mBar)
MAG NIET OVERSCHREDEN WORDEN!
Gebruik van een elektrische pomp of compressor
is geheel op eigen risico. Dit kan leiden tot
beschadiging van het SUP board.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for XQ Max 8DP001370 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of XQ Max 8DP001370 in the language / languages: All languages as an attachment in your email.

The manual is 1.15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info