797333
8
Zoom out
Zoom in
Previous page
1/18
Next page
www.xprgroup.com 8
4.1 Assembly instructions
4.2 Assembly
4.1.1 General assembly instructions
4.1.2 Removing the battery tab
Before assembling the PXPCYMF knob cylinder in a ire/smoke-resistant door, please recheck the ire certiication to
ensure conformity.
Ensure that the sealing aixed on the door does not hamper proper operation of the PXPCYMF.
Ensure that the knob cylinder projections do not obstruct the free swing of the door.
As electronic knob cylinders are supplied in a completely assembled state as standard, it may be necessary to perform the
steps for disassembly, as described in chapter 4.3, before mounting.
To activate the knob module, insert the batteries or remove the battery tag, if present, and close the casing (see chapter
6.2.1 Changing batteries).
Before mounting the knob module, always check that all components move freely.
Carry out the assembly with the door open.
Only for cylinders supplied as single components: During initial installation, put in 1 to 2 drops (max. 0.1 ml) of a non-resinous
oil in the cylinder body. It should not be sprayed directly into the cylinder body with a spray can.
1. Remove the knob cover (3).
2. Remove the battery tab (2).
3. Press the cover locking pin in (1, the second battery locking pin is located on the opposite side of the knob module) and
replace the knob cover (3). Please ensure that the locking pins are properly locked in the cover.
Remove the ixing screw of the existing cylinder and dismantle the current cylinder.
Push in the PXPCYMF cylinder casing and fasten with ixing screw. Tighten the ixing screw by hand, do not use a battery-operated
screwdriver with a high torque.
The cylinder body must not exceed by more than 1 to 3mm outside its
enclosing itting, but should not be sunk completely in the upholstery neither.
4 ASSEMBLY
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for XPR PXP-CY-MF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of XPR PXP-CY-MF in the language / languages: English as an attachment in your email.

The manual is 1.34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of XPR PXP-CY-MF

XPR PXP-CY-MF User Manual - German - 18 pages

XPR PXP-CY-MF User Manual - Dutch - 18 pages

XPR PXP-CY-MF User Manual - French - 18 pages

XPR PXP-CY-MF User Manual - Spanish - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info