797330
15
Zoom out
Zoom in
Previous page
1/18
Next page
www.xprgroup.com 15
9 KEY MANAGER SOFTWARE
9.1 Initialization of PXPCYBTMF
Before you add PXPCYBTMF units in the software, make sure that you have already taken these steps:
- Create buildings (Key manager mode only)
- Create loors (Key manager mode only)
- Create door groups
- Deine Holidays
By factory settings, the knob will not read any card until it is initialized.
To initialize the knob reader:
1. Go to Hardware Coniguration/Doors (or Rooms).
2. Add new door. Put name, select the type of the knob (PXPCYBTMF) and adjust the other settings.
3. Save the door and it will appear in the list on the left.
4. Go to Coniguration card tab.
5. Put the Initialization card on the USB Desktop Reader and click on “Initialization Card”. Wait for conirmation message -
Initialization Card created.
6. Hold the card in front of PXPCYBTMF. If the initialization is good, you will hear 3 long beeps and 3 short beeps. The LED
will
be green long and red short in the end.
Note: Init card is valid only for one knob. You can use the same card to initialize another knob, but you have to re-issue it.
Init card can be the one from KMPROGRAMMINGKIT, but it is not mandatory.
You can use ANY Card that is Desire Ev1 or Ev2, 2K or more.
After initialization of the knob, you can change any setting only with coniguration card.
Important Note: Make sure that you have created backup copy of the Key Manager database on safe place.
The knob can not be disassembled if the database is lost and you don’t have the Disassembly Service Card!
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for XPR PXP-CY-BT-MF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of XPR PXP-CY-BT-MF in the language / languages: English as an attachment in your email.

The manual is 4.11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of XPR PXP-CY-BT-MF

XPR PXP-CY-BT-MF User Manual - German - 18 pages

XPR PXP-CY-BT-MF User Manual - Dutch - 18 pages

XPR PXP-CY-BT-MF User Manual - French - 18 pages

XPR PXP-CY-BT-MF User Manual - Spanish - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info