797334

XPR LCS2 Manual

10
Zoom out
Zoom in
Previous page
1/12
Next page
www.xprgroup.com 10
CONNECTING LCS2 TO EWS CONTROLLER CONNEXION DU LCS AU CONTRÔLEUREWS
When LCS2 is connected to EWS Controller, settings must be done in
the PROS Software and in the LCS2 Keypad.
Example:
Create a User to access with Card or PIN Code. The Card Number is
8744987 and the PIN Code 12345.
Settings in the PROS Software
1. In the PROS Software, right click on the Reader and select
properties. In the Properties window select for Type: “LCS2” (1.1)
2. Select the Wiegand 26bit (1.2)
3. Press Save & Exit. In the event window a conirmation message will
appear as shown in ig.2
4. Adjust the PIN Length. Go to Settings/ System parameters. For
Keycode length select 5 digits. (ig3)
5. Go To Users Menu and select the user. In the Field User ID (Card
Number) write 8744987. In the Field ”Keycode” write the PIN Code
12345. Save the User. (ig.4)
Settings in the LCS
1. Enter the Menu of LCS2. Press B+000000.
2. Press 6, press 4. The Preset, programs the LCS2 Keypad to work
with EWS controller in Wiegand 26bit.
3. Adjust the PIN Length. Press 4, then press 5.
Type 12345 and access will be granted.
Lorsque le LCS2 est connecté au contrôleur EWS, les paramètres doivent être
déinis dans le logiciel PROS et à l’aide du clavier du LCS2.
Exemple:
Création d’un utilisateur avec accès à l’aide de la carte ou du code PIN. Le
numéro de la carte est 8744987 et le code PIN est 12345.
Coniguration dans le logiciel PROS
1. Dans le logiciel PROS, cliquez avec le bouton droit de la souris sur le lecteur et
sélectionnez les propriétés. Dans la fenêtre des propriétés, sélectionnez le type
: LCS2 (1.1)
2. Sélectionnez Wiegand 26 bits (1.2)
3. Cliquez sur Enregistrer et quitter. Dans la fenêtre d’événement, un message
de conirmation identique à celui de la igure 2 s’aiche
4. Déinissez la longueur du PIN. Accédez à Coniguration / Paramètres
système. Sélectionnez 5 chires comme longueur du code clavier. (ig. 3)
5. Accédez au menu Utilisateurs et sélectionnez l’utilisateur. Dans le champ
ID utilisateur (Numéro de carte), tapez 8744987. Dans le champ Code clavier,
entrez le code PIN 12345. Enregistrez l’utilisateur. (ig. 4)
Coniguration sur le LCS2
1. Entrez dans le menu du LCS2. Entrez B+000000.
2. Appuyez sur la touche 6, puis sur 4. Les préréglages programment le clavier
du LCS2 ain qu’il fonctionne avec le contrôleur EWS en Wiegand 26 bits.
3. Réglez la longueur du PIN. Appuyez sur 4, puis sur 5.
Saisissez 12345 et l’accès est accordé.
… 10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for XPR LCS2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of XPR LCS2 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 6.56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info