USING THE READER/EN UTILISANT LE LECTEUR/UTILIZZANDO IL LETTORE/
USANDO EL LECTOR/DE LEZER GEBRUIKEN/ INBETRIEBNAHME DES LESERS
HL1000MFby default DOES NOT read cards. In order the reader to be put in operation, the reader must be irst
initialized (by Init Card or via USB connection) and then User Cards must be issued.
HL1000MF par défaut NE lit PAS les cartes. Ain que le lecteur soir mis en route, celui-ci doit être tout d’abord initialisé (par carte
d’initialisation ou via une connexion USB) puis les cartes d’utilisateur doivent être ensuite émises.
Per impostazione predeinita, il dispositivo HL1000MF NON legge le schede. Ainché possa essere messo in funzione, il lettore deve prima essere
inizializzato (tramite scheda di iniz. o connessione USB), quindi devono essere rilasciate le schede utenti.
To Initialize the reader and to issue an user card in PROA MS Software:
1. Go to “Doors”, set the parameters of the door and save it.
2. Place a card on the USB Desktop reader and issue an “Init Card”.
3. Present the Init Card on the reader, green light and two short beeps indicate that the reader is initialized successfully.
4. Go To “Users”, click on “Add”, set the parameters of the user and save it.
5. Place another card on the USB Desktop reader and issue the User Card. From then on, the user card can be used and the
reader will respond to presenting the card with either access granted or access denied and green/red signalization.
To Initialize the reader and to issue a guest card in PROH MS Software:
1. Go to “Manage/Guest Rooms”, set the parameters of the door and save it.
2. Place a card on the USB Desktop reader and issue an “Init Card”.
3. Present the Init Card on the reader, green light and two short beeps indicate that the reader is initialized successfully.
4. Select the room from the main screen and click on “Check IN” or double click a room. Put the name of the guest, passport
number, arrival/departure date and click the “Check In” button.
5. Place another card on the USB Desktop reader and issue the Guest Card. From then on, the guest card can be used and the
reader will respond to presenting the card with either access granted or access denied and green/red signalization.
Pour initialiser le lecteur et délivrer une carte d’utilisateur dans le logiciel PROA MS :
1. Aller dans « Portes », paramétrer la porte puis l’enregistrer.
2. Placer une carte sur le lecteur USB de l’ordinateur et émettre une « Carte d’initialisation ».
3. Présenter la carte d’initialisation du lecteur, une lumière verte et deux bips brefs indiquent que le lecteur a été initialisé avec succès.
4. Aller dans « Utilisateurs », cliquer sur «Ajouter », déinir les paramètres de l’utilisateur et l’enregistrer.
5. Placer une autre carte sur le lecteur USB de l’ordinateur et émettre la carte d’utilisateur. À partir de maintenant, la carte d’utilisateur peut être
utilisée et le lecteur répondra à la présentation de la carte avec soit une permission d’accès ou un refus d’accès et une signalisation verte/rouge.
Pour initialiser le lecteur et émettre une carte d’hôte dans le logiciel PROH MS :
1. Aller dans « Gérer/Chambres d’hôtes », paramétrer la porte puis l’enregistrer.
2. Placer une carte sur le lecteur USB de l’ordinateur et émettre une « Carte d’initialisation ».
3. Présenter la carte d’initialisation du lecteur, une lumière verte et deux bips brefs indiquent que le lecteur a été initialisé avec
succès.
4. Sélectionner la porte sur l’écran principal puis cliquer sur « Enregistrement » et double-cliquer sur une chambre. Entrer le
nom de l’hôte, son numéro de passeport, sa date d’arrivée/de départ et cliquer sur le bouton « Enregistrer .»
5. Placer une autre carte sur le lecteur USB de l’ordinateur et émettre la carte d’hôte. À partir de maintenant, la carte d’utilisateur peut être
utilisée et le lecteur répondra à la présentation de la carte en permettant ou en refusant l’accès et en émettant un signal vert/rouge.
Per inizializzare il lettore e rilasciare una scheda utente all’interno del software PROA MS:
1. Andare su “Porte”, impostare i parametri della porta e salvare.
2. Posizionare una scheda sul lettore USB Desktop e rilasciare una “scheda di iniz.”.
3. Presentare la scheda di iniz. sul lettore, una luce verde e due segnali acustici brevi indicano che l’inizializzazione del lettore
è avvenuta in modo corretto.
4. Andare su “Utenti”, fare clic su “Aggiungi”, impostare i parametri dell’utente e salvare.
5. Posizionare un’altra scheda sul lettore USB Desktop e rilasciare la scheda utente. Da questo momento in poi, è possibile
utilizzare la scheda utente; il lettore risponderà alla presentazione della scheda con il segnale verde/rosso di accesso concesso o negato.
Per inizializzare il lettore e rilasciare una scheda ospite all’interno del software PROH MS:
1. Andare su “Gestione/Camere”, impostare i parametri della porta e salvare.
2. Posizionare una scheda sul lettore USB Desktop e rilasciare una “scheda di iniz.”.
3. Presentare la scheda di iniz. sul lettore, una luce verde e due segnali acustici brevi indicano che l’inizializzazione del lettore
è avvenuta in modo corretto.
4. Selezionare la camera dalla schermata principale e fare clic su “Check IN” o fare doppio clic su una camera. Inserire il nome
dell’ospite, il numero di passaporto, la data di arrivo/partenza e fare clic sul pulsante “Check in”.
5. Posizionare un’altra scheda sul lettore USB Desktop e rilasciare la scheda ospite. Da questo momento in poi, è possibile
utilizzare la scheda ospite; il lettore risponderà alla presentazione della scheda con il segnale verde/rosso di accesso concesso o negato.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for XPR HL1000-MF at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of XPR HL1000-MF in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.
The manual is 1.65 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
