797315
4
Zoom out
Zoom in
Previous page
1/12
Next page
www.xprgroup.com 4
CONNECTING EX6 AND IO BOARD RB0408 CONNEXION DE L’EX6 ET À LA CARTE IO RB0408
CONNESSIONE EX6 E SCHEDA IO RB0408 CONEXIÓN DE EX6 Y PLACA DE ES RB0408
VERBINDEN DES EX6 MIT RB0408 IOKARTE BEZIG MET VERBINDING MAKEN EX6 EN IOPANEEL RB0408
Dipswitch settings: refer to RB0408 manual
Paramètres des dipswitch: consulter le manuel du RB0408
Impostazioni del dipswitch: consultare il manuale di RB0408
Ajustes de interruptores DIP: consultar el manual del RB0408
Dip-schalter-einstellungen: Siehe das RB0408 Handbuch
Instellingen dip-switch: raadpleeg de handleiding van RB0408
EN FR
ES
IT
DE NL
• The proximity keypad EX6 can be connected to I/O board - RB0408
in order to expand the number of outputs to 10 relays.
• All 10 relays can be controlled from the keypad and can be
activated using PIN Code OR/AND Card.
• The connection between I/O Board RB0408 and the keypad EX6 is
RS485. For shorter distances(1020m) you can use any cable, for
longer distances use twisted pair qualiied RS485 cable.
• To use the I/O board, enable it from the EX6 menu:
Press 000 + B; press 5 + 1 + A + B to conirm.
Note: The I/O board works on 12 VDC, whereas EX6 works on 12/24
VAC/DC. Do not apply the same power supply to both units unless is
12 VDC.
• Le clavier de proximité EX6 peut être connecté à la carte
I/O - RB0408 ain d’augmenter le nombre de sorties à 10 relais.
• Les 10 relais peuvent être contrôlés à partir du clavier et peuvent
être activés à l’aide du code PIN OU/ET de la Carte.
• La connexion entre la carte I/O RB0408 et le clavier EX6 est de type
RS485. Pour des distances plus courtes (10 à 20 m), vous
pouvez utiliser n’importe quel câble. Pour des distances plus
longues, utilisez un câble de couplage torsadé RS485.
• Pour utiliser la carte I/O, activez-la à partir du menu EX6 :
Appuyez sur 000 + B ; appuyez sur 5 + 1 + A + B pour conirmer
Remarque : La carte I/O fonctionne sur 12 V CC, tandis que l’EX6
fonctionne sur 12/24 VAC/CC. N’appliquez pas la même tension aux
deux unités à moins qu’elle soit de 12 V CC.
• El teclado de proximidad EX6 se puede conectar a la placa de
E/S RB0408 para ampliar el número de salidas a 10 relés.
• Los 10 relés se pueden controlar desde el teclado y se pueden
activar mediante código PIN O/Y tarjeta.
• La conexión entre la tarjeta de E/S RB0408 y el teclado EX6 se
realiza mediante RS485. Para distancias cortas (1020 m) puede
utilizar cualquier cable; para distancias más largas utilice un cable
RS485 de par trenzado homologado.
• TPara utilizar la placa de E/S, actívela desde el menú de EX6:
Pulse 000 + B; para conirmar, pulse 5 + 1 + A + B.
Nota: La placa de E/S funciona con 12 V CC, mientras que EX6
funciona con 12/24 V CA/CC. No conecte la misma fuente de
alimentación a ambas unidades, salvo que sea de 12 V CC.
• La tastiera di prossimità EX6 può essere collegata alla scheda
I/O - RB0408 per poter espandere il numero di uscite a 10 relè.
• I 10 relè possono essere controllati dalla tastiera e attivati tramite
un codice PIN E/O con una scheda.
• Il collegamento tra la scheda I/O RB0408 e la tastiera EX6 è RS485.
Per distanze più corte (1020 m) è possibile utilizzare
qualsiasi cavo, per distanze maggiori utilizzare un cavo doppio
intrecciato qualiicato per RS485.
• Per utilizzare la scheda I/O, abilitarla dal menu EX6:
Premere 000 + B; premere 5 + 1 + A + B per confermare.
Nota: La scheda I/O funziona a 12 VDC, mentre la EX6 funziona a
12/24 VAC/DC. Applicare ad entrambe le unità la stessa alimentazione
di 12 VDC.
• Der RFIDLeser mit Tastatur EX6 kann mit einer RB0408 I/OKarte
verbunden werden, um die Anzahl der Ausgange auf bis zu 10 Relais zu
erhohen.
• Die 10 Relais werden uber die Tastatur gesteuert und uber PINCode
ODER/UND Karte aktiviert.
• Die Verbindung zwischen der RB0408 I/OKarte und dem Leser EX6
erfolgt uber RS485. Fur geringere Entfernungen (1020 m) konnen alle
Arten von Kabel verwendet werden, bei groseren Entfernungen muss
ein verdrilltes, fur RS485 geeignetes Kabel, verwendet werden.
• Bevor die I/OKarte verwendet werden kann, muss sie uber das EX6
Menu aktiviert werden:
Dazu geben Sie 000 + B ein; und dann 5 + 1 + A + B zur Bestatigung.
Bitte beachten: Die I/OKarte benotigt eine Spannungsversorgung von 12 VDC,
der EX6Leser jedoch 12/24 VAC/DC. Die beiden Gerate durfen nur an dieselbe
Spannungsversorgung angeschlossen werden, wenn es sich um 12 VDC handelt.
Het toetsenbord EX6 van de nabijheidslezer kan worden
aangesloten op het I/O-paneel - RB0408 om het aantal uitgangen
naar 10 relais uit te breiden.
Alle 10 relais kunnen worden bestuurd met het toetsenbord en
geactiveerd door middel van een pincode EN/OF kaart.
De aansluiting tussen het I/O-paneel RB0408 en het toetsenbord
EX6 is RS485. Voor kortere afstanden(1020m) kan een willekeurige
kabel worden gebruikt; gebruik voor langere afstanden een getwiste
goedgekeurde RS485-kabel.
Schakel het I/O-paneel in vanuit het menu EX6 om het te kunnen
gebruiken:
Druk op 000 + B; druk op 5 + 1 + A + B om te bevestigen.
Opmerking: Het I/O-paneel werkt op 12 V gelijkstroom, terwijl EX6 werkt op
12/24 V wisselstroom/gelijkstroom. Pas niet dezelfde voeding toe op beide
eenheden, met uitzondering van 12 V gelijkstroom. same power supply to both
units unless is 12 VDC.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for XPR EX6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of XPR EX6 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4.12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info