3.1 Wiring DINMTPXBTEHSA to Wiegand Controller /Câblage DINMTPXBTEHSA vers contrôleur Wiegand
/Cablaggio DINMTPXBTEHSA con controller Wiegand /Cableado de DINMTPXBTEHSA al controlador Wiegand
/Verdrahtung des DINMTPXBTEHSA mit dem Wiegand-Controller /Bedrading DINMTPXBTEHSA naar Wiegand-controller
By default, the reader is set to Wiegand 26 bit.You can set the reader, using the software, to Wiegand 24, 26, 32, 34, 56, 58 bits.
/Par défaut, le lecteur est réglé sur 26bits Wiegand.Vous pouvez régler le lecteur sur 24, 26, 32, 34, 56 ou 58bits Wiegand.
/Il lettore è impostato in modo predeinito su Wiegand 26 bit.Mediante il software è possibile impostare il lettore su
Wiegand a 24, 26, 32, 34, 56 e 58 bit.
/De forma predeterminada, el lector está conigurado en Wiegand 26 bits. Utilizando el software, puede conigurar el lector en
Wiegand 24, 26, 32, 34, 56, 58 bits.
/Der Leser ist werkseitig auf 26Bit-Wiegand eingestellt. Über die Software kann der Leser auf Wiegand 24, 26, 32, 34, 56, 58 Bit
koniguriert werden.
/De lezer is standaard ingesteld op Wiegand 26 bit. De lezer kan met behulp van de software worden ingesteld op 24, 26, 32, 34,
56, 58 bits.
If the reader is installed with sepa-
rate power supply, do not connect
power lines 1224VAC/DC lines to the
controller!
/Si le lecteur est installé avec une
alimentation séparée, ne connectez pas
les lignes électriques 1224VCA/CC au
contrôleur!
/Se il lettore è installato con alimen-
tazione separata, non collegare le linee
di alimentazione da 1224 VCA/CC al
controller!
/Si el lector está instalado con una
fuente de alimentación independiente,
¡no conecte líneas de alimentación de
1224VCA/CC al controlador!
/Wurde der Leser mit einer getrennten
Stromversorgung installiert, verbinden
Sie die 1224VAC/DC Spannungsver-
sorgung nicht mit dem Controller!
/Als de lezer wordt geïnstalleerd met
een afzonderlijke stroomvoorziening,
sluit u de stroomlijnen 1224 VAC/
DC-stroomlijnen naar de controller
niet af!
4. SETTING UP READERS WITH XPR SMART ADMIN WINDOWS SOFTWARE CONFIGURATION DES LECTEURS AVEC
LE LOGICIEL XPR SMART ADMIN SOUS WINDOWS IMPOSTAZIONE DEI LETTORI CON IL SOFTWARE XPR SMART
ADMIN WINDOWS CONFIGURACIÓN DE LECTORES CON EL SOFTWARE WINDOWS XPR SMART ADMIN LESER
KONFIGURATION MIT DER XPR SMART ADMIN WINDOWS SOFTWAREINSTELLEN VAN LEZERS MET XPR SMART
ADMIN WINDOWS SOFTWARE
1. Add site irst /Ajoutez d’abord le site /Aggiungere prima il sito /En primer lugar, añada el sitio /Fügen Sie zunächst einen Standort hinzu.
/Voeg eerst de vestiging toe.
2. Click on “ADD” reader /Cliquez sur «AJOUTER» lecteur /Fare clic su “AGGIUNGI” lettore /Haga clic en “AÑADIR” lector /Klicken Sie auf Leser
„Hinzufügen“. /Klik op lezer ‘TOEVOEGEN’.
3. Select type “DINMTPXBTEHSA” /Sélectionnez le type«DINMTPXBTEHSA» /Selezionare il tipo “DINMTPXBTEHSA”
/Seleccione el tipo “DINMTPXBT- EHSA” /Wählen Sie als Typ DINMTPXBTEHSA. /Selecteer type ‘DINMTPXBTEHSA’.
4.Scan for readers near by clicking on “Scan”. Found readers will be listed (pic.2). Click on “Select” /Recherchez les lecteurs à proximité en cliquant sur
« Scanner». Une liste des lecteurs détectés sera aichée (image2). Cliquez sur «Sélectionner» /Eseguire la ricerca di lettori vicini facendo clic su
“Scan sione”. Sarà visualizzato un elenco dei lettori trovati (ig. 2). Fare clic su “Seleziona” /Busque los lectores cercanos haciendo clic en “Escanear”.
Aparecerá una lista de los lectores encontrados (imagen 2). Haga clic en “Seleccionar” /Klicken Sie auf „Suchen“, um nach Lesern zu suchen, diese
erscheinen dann in der Liste (Abb. 2). Klicken Sie auf „Auswählen“. /Zoek naar lezers in de buurt door te klikken op ‘Scannen’. De gevonden lezers
worden weergegeven (ab. 2). Klik op ‘Selecteren’.
5.Add a pairing key and the password. (pic. 3) /Ajoutez une clé d’appariement et le mot de
passe. (image 3) /Aggiungere una password di associazione e la password. (ig. 3) /Añada
una clave de vinculación y la contraseña. (imagen 3) /Geben Sie Pairing-Code und Passwort
ein (Abb. 3)./Voer een koppelingssleutel en een wachtwoord toe. (Ab. 3).
6.If the pairing is successful, the buttons in the reader section will be enabled. (pic.4) /Si la
synchronisation est réussie, les boutons de la section lecteur seront activés. (image 4) /Se
l’associazione viene eseguita correttamente, i pulsanti nella sezione del lettore verranno
abilitati. (ig. 4) /Si la vinculación se realiza correctamente, se habilitarán los botones de la
sección del lector. (imagen 4) /War das Pairing erfolgreich, sind die Schaltlächen im Leser
fenster aktiviert (Abb.4). /Als de koppeling is gelukt, worden de knoppen
van de lezer ingeschakeld. (ab. 4).
Defaults: /Paramètres par défaut: /Predeiniti: /Valores predeterminados: /Voreinstellungen:/Standaard:
Pairing key: 12345678 /Clé d’appariement: 12345678 /Password di associazione: 12345678
/Clave de vinculación: 12345678 /Pairing-Code: 12345678 /Koppelingssleutel: 12345678
Password: 00000000 /Mot de passe: 00000000 /Password: 00000000
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for XPR DINMTPX-BT-EH-SA at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of XPR DINMTPX-BT-EH-SA in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.
The manual is 1.79 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
