797313
6
Zoom out
Zoom in
Previous page
1/20
Next page
6. VERBINDEN DER FINGERABDRUCKLESER MIT EINEM CONTROLLER EINES ANDEREN HERSTELLERS
Verbinden Sie die D0, D1, GND und +12V Anschlüsse mit dem Controller des anderen Herstellers.
Verbinden Sie die RS-485 Datenleitung (A, B) mit dem Konverter. Verbinden Sie den Konverter mit dem PC.
Die Registrierung der Fingerabdrücke erfolgt über die PC-Software. Dazu muss eine Verbindung zwischen den
Fingerabdrucklesern und dem PC bestehen.
Die Fingerabdruckleser kommunizieren über RS-485 miteinander und über einen Konverter mit der PC-Software.
Die RS-485 Datenleitung sollte als Reihenschaltung und NICHT als Sternschaltung konfiguriert werden. Halten Sie die
Kabelverbindungen zur RS-485 Datenleitung so kurz wie möglich (max. 5 m)
Es wird nur ein Konverter für die gesamte Installation benötigt, nicht je Leser.
Biometric Reader Converter
RS 485 A
RS 485 B
PIN 1 (RS 485 +)
PIN 2 (RS 485 -)
CNV200
RS-485 zu USB-Konverter
Wird wie ein USB-Gerät
installiert (siehe CNV200
Handbuch).
6.1 DIE VERSCHIEDENEN KONVERTER/PIN BELEGUNG
PIN 1
BIOMANAGER Software
RS485 A
RS485 B
A
B
- + D0 D1 - + D0 D1 - + D0 D1 - + D0 D1
CNV200 B100PROX-USB
7. REGISTRIERUNG
Folgen Sie den Anweisungen unten, zum korrekten Einlesen des Fingers.
Legen Sie den gewünschten Finger beginnend mit dem ersten Fingerglied
auf den Sensor und bewegen Sie ihn mit einer gleichmäßigen,
ununterbrochenen Streichbewegung auf sich zu.
Ergebnis:
Bei erfolgreichem Einlesen: die dreifarbige Status-LED leuchtet grün + OK-
Signal ertönt (kurz + langer Piepton)
Bei ungültigem oder fehlgeschlagenem Einlesen: die dreifarbige Status-LED
leuchtet rot + Fehlersignal ertönt (3 kurz Pieptöne)
CNV1000
CNV1000
RS-485 zu TCP/IP-Konverter
Es ist keine Installation erforderlich.
IP-Adresse wird durch Internet
Browser zugewiesen
6
Controller anderer Hersteller Controller anderer Hersteller
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for XPR B100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of XPR B100 in the language / languages: German as an attachment in your email.

The manual is 4.95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of XPR B100

XPR B100 User Manual - English - 20 pages

XPR B100 User Manual - Dutch - 20 pages

XPR B100 User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info