678210
7
Zoom out
Zoom in
Previous page
1/10
Next page
OPERATING INSTRUCTIONS
Operating the system
Make sure all the connections between antenna system and control box and between
receiver and control box using the loop out port are connected properly.
Make sure the handle of the antenna points towards the floor while in operation in order
to prevent a limited signal reception.
Turn on the system
“Turn onthe On/Off switch on the front of the control box. The LED on the front panel
will turn on and the system will start to operate. You can see on the control panel what
satellite the system is set to.
The system will automatically search for the satellite. This will take about 30-60
seconds. After the satellite has been found the signal will be transferred to your receiver
or TV set via the loop out port of the control box.
You can use the control panel to switch between the preprogrammed satellite positions.
Turn off the system
To turn off the system, press the “ ” button located on the front of the control panel.
When the antenna system is totally closed, the LED indicator will be turned off on the
control panel.
Operating the antenna via DiSEqC
The antenna unit can be directly controlled by user’s receiver without requiring the
control panel through DiSEqC(1.1/1.0) bus communication
When diseqc feature is enabled the control box behaves like DiSEqC switch each
DiSEqC port will be representing correspond number satellite as shown in the following
table
Port A - Satellite 1 (Astra 1 – 19,2° East)
Port B - Satellite 2 (Astra 2 – 28,2° East)
Port C - Satellite 3 (Astra 3 – 23,5° East)
Port D - Satellite 4 (Hotbird – 13,0° East)
Port E - Satellite 5 (Eutelsat 9,0° East)
Port F - Satellite 6 (Turksat 42,0° East)
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xoro MPA 38 Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xoro MPA 38 Pro in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Xoro MPA 38 Pro

Xoro MPA 38 Pro Installation Guide - German - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info