678114
25
Zoom out
Zoom in
Previous page
1/30
Next page
25
English
Procedure for the manual station search:
Use the ▲ / ▼ buttons from the first satellite, you want to set.
Press the OK button. An arrow appears before the selected satellite. The arrow causes the
satellite will be considered at the next station search.
Press the ► button twice to switch to the right side.
Using the ▲ / ▼ buttons to select the different settings, use the buttons
◄ / ► to change this.
Have you adjusted the settings for the satellite, press the EXIT button and then ◄ to switch
back to the left side.
Can you receive with your reception system more satellites, select now the ▲ / ▼ another
satellites, press the OK button for this, and then make the settings on the right side in front.
Repeat steps for all satellites that you can receive with your antenna system.
Notes:
In the lower part of the menu after the settings for the selected satellite have been carried out
correctly and a transponder in the middle, the approximate values for the signal quality dis-
plays.
If a satellite is not in the list, you can add it by pressing the yellow button. A window opens,
enter the values for longitude, east / west and the tape. Enter the new satellite name. If you
add a new satellite, you have the following tuning the search mode "blind search" be used.
When you add a satellite from the list, no signal quality may be displayed despite correct
settings. This indicator is only available on satellite, for a transponder list was deposited.
If one transponder in the list is missing, you can add it by pressing the yellow button. Alterna-
tively you can use the search type "blind search" to search for new stations.
For the satellite and transponder list following configuration options are available:
Red button Deletes the selected satellite / transponder from the list
Green button Here you can edit the receiver parameters of the selected satellite / Transpo
nders
Yellow button Sets manually at a new satellite or transponder. Enter into this menu at the
reception parameters. With the OK button, the unit saves the settings and
created satellite / transponder appears in the list and can be searched in the
transponder scan.
Blue Taste Starts channel search
OK Selection / deselection
EXIT Cancel the search
Main menu
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xoro HTL2446 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xoro HTL2446 in the language / languages: English as an attachment in your email.

The manual is 2,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Xoro HTL2446

Xoro HTL2446 User Manual - German - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info