678104
26
Zoom out
Zoom in
Previous page
1/30
Next page
26
English
For the column of the tuning following configuration options are available:
LNB Typ define the oscillator frequency for your LNB . Please take the correct value from the
manual of your LNB (standard:09750/10600)
LNB Voltage This parameter defines the storm voltage of the antenna, and signal from horizontal
or vertical polarized transponder will be received. The setting will only have to be
changed in very rare cases. A false setting will result in missing program or no signal
reception at all. (standard: On)
22KHz The receiver can switch the LNB with 22 KHz signals for the reception of another
frequency band. The setting will only have to be changed in very rare cases. A false
setting will result in missing program or no signal reception at all. (standard: Auto)
Toneburst Tone burst switcher has two input ports, enabling the connection of 2 antennas or
LNB to the receiver. If you have a Tone burst switcher, you will have to select one of
the both connections (A or B) for the satellite chosen on the left side.
DiSEqC DiSEqC switcher has up to 16 input ports enabling the connection of multiple anten
nas or LNB to the receiver. If you have a DiSEqC switcher, you will have to select one
of connections for the satellite chosen on the left side. Please check which version
(1.0, 1.1) could be supported in the manual of your switcher.
Motor Rotatable Antennas require extended configurations. We recommend professional
installation from a technician. Please set up according to your antenna.
Use a Unicable reception system, please proceed as follows:
Navigate in the manual tuning to the right column to the menu item LNB type and press the
OK button.
Select from the list at the bottom of the option Unicable and press the OK button to make
further adjustments to your Unicable reception system:
LNB high / low Define the frequency range for your Unicable LNB. No changes need
to be made here normally.
User ID Each receiver in a single-cable reception system must be assigned a
user ID. Most systems are designed for 4 or 8 receivers. It is im
portant to ensure that only one receiver is assigned a user tape. Uses
more than one receiver, the same user ID, it comes to function
disorders. Other, incorrectly Receiver can cause the reception of the
equipment is impaired.
Frequenz Each user band is a frequency band associated with that you must
set in this menu item, each user on each band.
Notes:
Please ask the installer of your reception system, which are user band and what frequency
band available to you. In the documents relating to your reception system, this information
should be also be found.
Note that all components of your receiving system for the cable system must be compatible.
Main menu
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xoro HTC 1346 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xoro HTC 1346 in the language / languages: English as an attachment in your email.

The manual is 2,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Xoro HTC 1346

Xoro HTC 1346 User Manual - German - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info