497010
69
Zoom out
Zoom in
Previous page
1/142
Next page
HSD 8550 23
English
PLAYBACK
With the V.MODE button you can change the video output without using the setup settings. The
sequence is:
TV-RGB —> P-SCAN —> S-Video —> Interlace YUV —> TV-RGB
By using a SCART connection the picture quality changes slightly but visible during pressing the
V.MODE button.
Important Note by using 3-wire component cable with progressive Scan (YUV PSCAN or Y
Pb Pr):
If you uses 576p with an 3-wire component cable and you press the V.MODE button the picture
disappears from the screen. Don’t worry about it, because you can restore the picture by pressing
the V.MODE button more times. Please wait several seconds after one pressing the button before
you press again the V.MODE button. After three-times pressing a picture shall be appear on the
screen.
Important Note by using 3-wire component cable with progressive Scan (YUV or Y Cb Cr):
Your TV set doesn’t support PSCAN!!!
If you uses 576i with an 3-wire component cable and you press the V.MODE button the picture
disappears from the screen. Don’t worry about it, because you can restore the picture by pressing
the V.MODE button more times. Please wait several seconds after one pressing the button before
you press again the V.MODE button. After three-times pressing a picture shall be appear on the
screen.
Notes:
By using a HDMI connection the V.MODE button has no influence on the picture quality.
In case of no picture on the screen, please control the cable connection between HSD 8550
and the TV set. If all cables are connected successful, please install an CVBS video
connection between DVD-Player and TV. Change by the TV set to the AV or CVBS input
and the picture shall be appear on the screen. Than you can set the video output of the
DVD-Player until your current connection has a picture again.
If you have connected the device using an HDMI or a 3-pin component cable, you can also use the
upscaling feature of the device. Support will be an output up to 1080p. To change the resolution,
you can press the button RES HD without visiting the actual setup menu. The change sequence is
YUV(S-VIDEO/RGB/P-SCAN)->720p->1080i->1080p->YUV(S-VIDEO/RGB/P-SCAN)
When changing to higher resolutions of 576p a security prompt appears on the screen. If your TV
supports 720p or more, so you can confirm this.
If the change in time but no image (black) appears, press the HD RES button until a picture is
visible.
Change Video putput
HD Resolution
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xoro HSD 8550 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xoro HSD 8550 in the language / languages: English, German as an attachment in your email.

The manual is 5,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info