497010
60
Zoom out
Zoom in
Previous page
1/142
Next page
14 HSD 8550
English
Connection
Connecting with a YUV (Y Pb Pr) cable
YUV (Y Pb Pr) is a transmission technology separating colour and brightness information in the
signal. Similar to RGB, the signals are transmitted on a 3 wire cinch [RCA] cable. This way of
transmission is also called “component”. This connection offers best picture quality available with
analogue signal transmission.
Plug a cable into the Y Pb Pr socket on the rear side of your DVD player. You can recognize the
sockets by their colours red, green and blue easily. The other side of the cable must be connected
to the Y Pb Pr input socket of the TV-set (usually labelled „Y Pb Pr“ or „HDTV IN“.
Please change the video output in the Setup settings to “YUV
”. In case, that your TV set supports
progressive Scan, you can choose by the settings “Resolution
” by the option “Video Settings”.
Please uses a resolution of 576p or 720p and than the player transmit a progressive signal to the
TV set.
As YUV does not transmit sound, you also must add an audio connection. Insert one end of the
supplied audio (Cinch [RCA]) cable into the white/red Cinch [RCA] socket L/R AUDIO OUT at the
back of the DVD player and the other end into the audio input socket (usually white/red) on the TV
set (usually labelled “AUDIO IN” or “AV IN”. Please also refer to your TV set’s user manual). Switch
on the TV set and select the YUV input or the respective channel number. For channel number and
input selection please also refer to your TV operating instructions.
Note:
Make sure you observe the colours of the three sockets when you establish the connection. When
the colours are connected in a wrong way, no picture or a picture with wrong colours will be
displayed.
Connecting with a HDMI Cable
HDMI is a digital transmission technology for both audio and video. Connect the DVD player and
display with a HDMI-HDMI cable. Please note that some TV set can not support RAW audio. In this
case, please set the DVD player audio digital output to PCM.
If your TV set is not equipped with HDMI, but with DVI input, you can use a conversion cable or an
adapter to DVI.
As DVI does not transmit sound, you also must add an audio connection. Insert one end of an audio
(Cinch [RCA]) cable into the white/red Cinch [RCA] socket ML/MR AUDIO OUT at the back of the
DVD player and the other end into the audio input socket (usually white/red) on the TV set (usually
labelled “AUDIO IN” or “AV IN”. Please also refer to your TV set’s user manual)
You can choose in the settings “Resolution
” by the option “System Settings” the resolution which
you want or which the TV set supports.
Switch on the TV set and select the HDMI or DVI input. For input selection please also refer to your
TV operating instructions.
Video Output
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xoro HSD 8550 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xoro HSD 8550 in the language / languages: English, German as an attachment in your email.

The manual is 5,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info